STJH SMOOTH-2MM cured epoxy flooring sample with a glossy face and fine-filled cut edge on white

STJH-EPOXY-SELF-LEVELING-FLOORING-SMOOTH-2MM

Epoxy Self-Leveling Flooring 2 mm Smooth

A rigid, fine-filled epoxy topping for dry production floors where a smooth surface supports everyday cleaning.

Nominal 2 mm wearing system
Fine quartz incorporated into the resin
Smooth gloss finish for dry working areas

견적 요청 제품 찾아보기

About This Product

The SMOOTH-2MM model combines a bonded epoxy primer with a self-smoothing wearing course. Fine quartz is dispersed within the resin rather than scattered across the exposed face, giving the cured floor a continuous gloss appearance. Its shallow build suits sound concrete that already has the required falls and flatness. This is the straightforward smooth version for clean industrial traffic, with no resilient cushion or decorative aggregate surface.

주요 기능

Dense contact surface

The filled resin closes the exposed concrete surface, reducing places where routine tracked dirt can collect between cleaning cycles.

Controlled application depth

A notched trowel or pin rake spreads the mix, followed by a spiked roller to release entrapped air before cure.

Predictable floor geometry

The thin bonded overlay preserves existing room levels when substrate defects are repaired before the topping is placed.

기술 매개변수

Resin Type	Two-component epoxy
Nominal Thickness	2 mm
Filler	Fine quartz, 0.1-0.3 mm
System Layers	Epoxy primer and self-smoothing topping
표면 마무리	Smooth gloss
Installation Method	Notched trowel or pin rake; spiked roller
Suitable Base	Prepared concrete or cement screed
Traffic Duty	Medium to heavy internal wear
Application Temperature	10-35 °C
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Suitable for dry assembly rooms, pharmaceutical support areas and enclosed material corridors. Choose this version when cleaning access and rolling movement matter more than a coarse traction profile. Existing movement joints should continue through the finish so the topping is not asked to restrain slab movement.

Solutions for Your Application

Small holes in the slab may leave visible pinholes in the new finish.

Fill exposed voids and establish a continuous primer before placing the smooth topping.

The purchaser needs a cleanable floor without raising thresholds substantially.

Use the nominal 2 mm build and detail each doorway against the measured adjoining floor level.

사용 가능한 옵션

Specify a practical solid colour, matching cove treatment and transition detail. For persistently wet routes, request a separately selected traction system instead of changing this smooth model during installation.

Planning a Epoxy Self-Leveling Flooring 2 mm Smooth specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.