STjh two-cell gel-seal bag-in bag-out filter housing

STJH-BAG-IN-BAG-OUT-FILTER-HOUSING-1X2-GEL

Bag-In/Bag-Out Filter Housing 1 × 2 Gel-Seal

A two-wide stainless safe-change housing using gel knife-edge HEPA seals and separate PVC service barriers.

Two filters wide
Gel knife-edge seals
Single-tier service height

Giới thiệu Sản phẩm

Two full-size filters are arranged side by side to increase face area without creating an upper service tier. Each cell uses a housing knife edge that enters the filter gel channel, and each access opening carries its own change bag so one filter can be handled without sharing a contaminated service enclosure with the adjacent cell.

Các tính năng chính

Medium-flow face area

The horizontal two-cell bank divides airflow across a larger filter area while remaining one filter high.

Positive gel engagement

An external locking arm drives each knife edge uniformly into the perimeter gel channel.

Cell-by-cell servicing

Individual bagging rings and doors keep each filter change localized to its own access port.

Thông số kỹ thuật

Filter Arrangement	1 high x 2 wide
Nominal Filter Face per Cell	610 x 610 mm (24 x 24 in)
Primary Filter Depth	292, 406 or 457 mm
Seal Interface	Gel-filled perimeter channel with housing knife edge
Housing Material	304L or 316L stainless steel
Filter Access	One service side with an individual door for each cell
Change-Out Bag	203 µm (8 mil) PVC on dual-ribbed rings
Particulate Filter Range	HEPA grades selected for the required duty
Prefilter Track	Optional 51, 102 or 152 mm stage
Tùy chỉnh	Steel grade, filter depth, access arrangement, scan-test section and duct transitions can be configured for the intended exhaust train.

Applications

Pharmaceutical, biotechnology and hospital-isolation exhaust branches that need two-cell airflow capacity and serviceable gel-seal HEPA filtration.

Solutions for Your Application

A single filter creates excessive resistance or face velocity at the required exhaust volume.Divide the duty across two side-by-side cells after selecting filters from the system airflow and pressure calculation.

The project requires a seal that can support cell-level in-place integrity assessment.Specify gel-channel filters, correct knife-edge engagement and a compatible scan-test section in the housing train.

Các tùy chọn có sẵn

304L or 316L construction, filter depth, upstream or downstream service hand, prefiltration, static taps, scan-test section, isolating dampers and decontamination ports are available.

Planning a Bag-In/Bag-Out Filter Housing 1 × 2 Gel-Seal specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi