STjh two-cell gel-seal bag-in bag-out filter housing

STJH-BAG-IN-BAG-OUT-FILTER-HOUSING-1X2-GEL

Bag-In/Bag-Out Filter Housing 1 × 2 Gel-Seal

A two-wide stainless safe-change housing using gel knife-edge HEPA seals and separate PVC service barriers.

Two filters wide
Gel knife-edge seals
Single-tier service height

مقدمة المنتج

Two full-size filters are arranged side by side to increase face area without creating an upper service tier. Each cell uses a housing knife edge that enters the filter gel channel, and each access opening carries its own change bag so one filter can be handled without sharing a contaminated service enclosure with the adjacent cell.

الخصائص الرئيسية

Medium-flow face area

The horizontal two-cell bank divides airflow across a larger filter area while remaining one filter high.

Positive gel engagement

An external locking arm drives each knife edge uniformly into the perimeter gel channel.

Cell-by-cell servicing

Individual bagging rings and doors keep each filter change localized to its own access port.

المعلمات الفنية

Filter Arrangement	1 high x 2 wide
Nominal Filter Face per Cell	610 x 610 mm (24 x 24 in)
Primary Filter Depth	292, 406 or 457 mm
Seal Interface	Gel-filled perimeter channel with housing knife edge
Housing Material	304L or 316L stainless steel
Filter Access	One service side with an individual door for each cell
Change-Out Bag	203 µm (8 mil) PVC on dual-ribbed rings
Particulate Filter Range	HEPA grades selected for the required duty
Prefilter Track	Optional 51, 102 or 152 mm stage
التخصيص	Steel grade, filter depth, access arrangement, scan-test section and duct transitions can be configured for the intended exhaust train.

Applications

Pharmaceutical, biotechnology and hospital-isolation exhaust branches that need two-cell airflow capacity and serviceable gel-seal HEPA filtration.

Solutions for Your Application

A single filter creates excessive resistance or face velocity at the required exhaust volume.Divide the duty across two side-by-side cells after selecting filters from the system airflow and pressure calculation.

The project requires a seal that can support cell-level in-place integrity assessment.Specify gel-channel filters, correct knife-edge engagement and a compatible scan-test section in the housing train.

الخيارات المتاحة

304L or 316L construction, filter depth, upstream or downstream service hand, prefiltration, static taps, scan-test section, isolating dampers and decontamination ports are available.

Planning a Bag-In/Bag-Out Filter Housing 1 × 2 Gel-Seal specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا