STjh compact 500 mm vertical unidirectional pass box with white outer cabinet, stainless chamber and top HEPA plenum

STJH-VERTICAL-UNIDIRECTIONAL-PASS-BOX-500

Vertical Unidirectional-Flow Pass Box 500 mm

A compact 500 mm clean-air transfer cube for small sterile components and laboratory packs.

500 mm cubic chamber
365 x 365 mm HEPA filter
0.2 kW power input

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The smallest vertical-flow model provides a 500 mm cubic work zone beneath a 365 x 365 mm HEPA filter. A nominal 0.45 m/s downward airflow sweeps particles toward the return path while using only 0.2 kW connected power. Its 750 x 500 x 900 mm outer envelope suits small wall openings, but payloads must remain below the supply diffuser and leave airflow clearance.

Ana Özellikler

Compact unidirectional zone

The small chamber maintains a downward clean-air path around laboratory-size items.

Low connected load

A 0.2 kW rating suits installations with limited local electrical capacity.

Small filter format

The 365 mm filter matches the compact work zone and reduces replacement-media size.

Teknik parametreler

Useful Dimensions	500 W x 500 D x 500 H mm
Outside Dimensions	750 W x 500 D x 900 H mm
HEPA Filter Size	365 x 365 mm
Air Velocity	0.45 m/s nominal
Connected Power	0.2 kW
Airflow Direction	Vertical downward unidirectional flow
Door Arrangement	Opposing interlocked doors
Construction	Powder-coated steel or SUS304
Typical Load	Small sterile components and packs
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Applications

For sterile samples, compact medical components and laboratory material transfer where active vertical wash is desired. Keep packages low enough to avoid disturbing the diffuser and validate air velocity with the normal load in place.

Solutions for Your Application

A tall package sits too close to the HEPA diffuser and disrupts uniform flow.Limit approved loads to a height that preserves the commissioning clearance below the filter face.

The smallest chamber may encourage operators to force oversized packages through the gasket.Publish a load gauge below the 500 mm internal dimensions and route larger items to the 600 or 700 mm unit.

Mevcut Seçenekler

Select powder-coated or SUS304 construction, interlock type, pressure gauge and purge timer. Coordinate the 750 mm equipment width with service access.

Planning a Vertical Unidirectional-Flow Pass Box 500 mm specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun