İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Contamination-conscious material choice
Selecting a resin for particle and volatile-emission behaviour addresses a floor-related concern that resistance measurements alone do not describe.
STJH-CONDUCTIVE-EPOXY-FLOORING-CR15
Conductive Epoxy Flooring Low-Emission Cleanroom
A specialist conductive epoxy wearing layer selected for cleanroom contamination control as well as electrical function.
- 1.5 mm self-smoothing wearing layer
- Low-emission formulation focus
- Conductive cleanroom surface
About This Product
CR15 is a total-solids conductive epoxy construction with a nominal 1.5 mm self-smoothing wearing layer. Its formulation selection focuses on low particle generation and low volatile emissions, distinguishing it from a general-purpose conductive coating. The fine-filled resin produces a gloss surface above the compatible grounded underlayers. This model is intended for sensitive production environments where the floor material itself forms part of contamination planning.
Ana Özellikler
Fine-filled application
Controlled filler loading helps the resin form an even face without introducing the coarse texture of a broadcast floor.
Accessible inspection surface
A smooth solid-colour finish makes visible residue and local damage easier to identify during room maintenance.
Teknik parametreler
| Resin Base | Total-solids conductive epoxy |
|---|---|
| Wearing-Layer Thickness | Approximately 1.5 mm |
| Finish | Self-smoothed gloss |
| Mixed Resin Density | Approximately 1.5 kg/L at 23 °C |
| Solids by Volume | Approximately 100% |
| Emission Design | Low particle and low VOC/AMC formulation |
| Reference Ground Resistance | Typically below 1 × 10⁶ Ω |
| Grounding Interface | Compatible conductive underlayers |
| Application Temperature | 15-30 °C |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Applications
Consider CR15 for optics, medical-device and precision-component cleanrooms. The cleanroom process should determine which material-emission attributes matter and how the floor is maintained. No room cleanliness class follows automatically from the selection of this resin floor.
Solutions for Your Application
A conductive floor may still be unsuitable near contamination-sensitive work.
Select the cleanroom-oriented resin formulation alongside the required electrical construction.
Too much filler could change flow and surface quality.
Keep filler loading within the selected formulation and control the wearing-layer thickness.
Mevcut Seçenekler
Specify the practical colour, earthing arrangement and compatible cove treatment. Coordinate detergents and surface renewal materials so later maintenance preserves the original cleanroom and conductive intent.
Planning a Conductive Epoxy Flooring Low-Emission Cleanroom specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
