STJH CR15 cleanroom conductive epoxy sample with a smooth gloss surface and fine-filled cut edge on white

STJH-CONDUCTIVE-EPOXY-FLOORING-CR15

Conductive Epoxy Flooring Low-Emission Cleanroom

A specialist conductive epoxy wearing layer selected for cleanroom contamination control as well as electrical function.

1.5 mm self-smoothing wearing layer
Low-emission formulation focus
Conductive cleanroom surface

견적 요청 제품 찾아보기

About This Product

CR15 is a total-solids conductive epoxy construction with a nominal 1.5 mm self-smoothing wearing layer. Its formulation selection focuses on low particle generation and low volatile emissions, distinguishing it from a general-purpose conductive coating. The fine-filled resin produces a gloss surface above the compatible grounded underlayers. This model is intended for sensitive production environments where the floor material itself forms part of contamination planning.

주요 기능

Contamination-conscious material choice

Selecting a resin for particle and volatile-emission behaviour addresses a floor-related concern that resistance measurements alone do not describe.

Fine-filled application

Controlled filler loading helps the resin form an even face without introducing the coarse texture of a broadcast floor.

Accessible inspection surface

A smooth solid-colour finish makes visible residue and local damage easier to identify during room maintenance.

기술 매개변수

Resin Base	Total-solids conductive epoxy
Wearing-Layer Thickness	Approximately 1.5 mm
Finish	Self-smoothed gloss
Mixed Resin Density	Approximately 1.5 kg/L at 23 °C
Solids by Volume	Approximately 100%
Emission Design	Low particle and low VOC/AMC formulation
Reference Ground Resistance	Typically below 1 × 10⁶ Ω
Grounding Interface	Compatible conductive underlayers
Application Temperature	15-30 °C
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Consider CR15 for optics, medical-device and precision-component cleanrooms. The cleanroom process should determine which material-emission attributes matter and how the floor is maintained. No room cleanliness class follows automatically from the selection of this resin floor.

Solutions for Your Application

A conductive floor may still be unsuitable near contamination-sensitive work.

Select the cleanroom-oriented resin formulation alongside the required electrical construction.

Too much filler could change flow and surface quality.

Keep filler loading within the selected formulation and control the wearing-layer thickness.

사용 가능한 옵션

Specify the practical colour, earthing arrangement and compatible cove treatment. Coordinate detergents and surface renewal materials so later maintenance preserves the original cleanroom and conductive intent.

Planning a Conductive Epoxy Flooring Low-Emission Cleanroom specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.