İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Dual selection criteria
Resin choice addresses the expected chemical exposure, while the conductive construction addresses static charge generated in the working area.
STJH-ANTISTATIC-EPOXY-FLOORING-NOVOLAC-08
Antistatic Epoxy Flooring Novolac Floor Coating
A thin novolac epoxy ESD system for chemical-handling areas where ordinary static-control epoxy is not the preferred resin.
- Conductive novolac epoxy wearing layer
- 0.6-0.8 mm total system
- Smooth finish with grounded primer architecture
About This Product
NOVOLAC-08 uses a conductive novolac epoxy wearing coat over a conductive primer and prepared epoxy-primed base. The complete construction is approximately 0.6-0.8 mm, distinct from the thickness of the individual wearing coat. Novolac chemistry provides the chemical-resistance basis, while the grounding and footwear arrangement provides the static-control system. It is a smooth coating rather than a thick chemical-resistant broadcast floor.
Ana Özellikler
Through-layer conductivity
The conductive wearing material forms part of the charge path throughout its thickness, rather than relying on a temporary surface treatment.
Compact smooth body
The shallow unbroadcast build can suit sound existing floors where additional screed depth would interfere with equipment clearances.
Teknik parametreler
| Resin Type | Two-component novolac epoxy |
|---|---|
| Total Build | 0.6-0.8 mm |
| Underlayers | Epoxy primer and conductive primer |
| Surface | Smooth nonporous coating |
| Electrical Construction | Through-thickness conductive wearing layer |
| Reference Conductive Range | 2.5 × 10⁴ to 1.0 × 10⁶ Ω |
| Footwear Arrangement | Compatible ESD footwear |
| Ground Connection | Via conductive underlayer |
| Chemical Duty | Selected chemical splash and spill exposure |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Applications
Appropriate for chemical-handling electronics rooms and pharmaceutical process support areas. Chemical identity, concentration and contact duration matter when selecting the resin package. The floor and ESD footwear should be considered together instead of treating a resistance value as a complete protection system.
Solutions for Your Application
The floor must handle chemical exposure as well as static-sensitive work.
Select the novolac wearing resin with the complete grounded ESD layer arrangement.
A standard novolac coating is assumed to provide ESD control.
Specify the conductive formulation and primer explicitly; the resin name alone does not establish static-control behaviour.
Mevcut Seçenekler
Choose colour, compatible cove and earthing configuration. Maintain the smooth unbroadcast architecture and discuss the actual chemical exposure so surface selection remains specific to the room.
Planning a Antistatic Epoxy Flooring Novolac Floor Coating specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
