English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Dual selection criteria
Resin choice addresses the expected chemical exposure, while the conductive construction addresses static charge generated in the working area.
STJH-ANTISTATIC-EPOXY-FLOORING-NOVOLAC-08
Antistatic Epoxy Flooring Novolac Floor Coating
A thin novolac epoxy ESD system for chemical-handling areas where ordinary static-control epoxy is not the preferred resin.
- Conductive novolac epoxy wearing layer
- 0.6-0.8 mm total system
- Smooth finish with grounded primer architecture
About This Product
NOVOLAC-08 uses a conductive novolac epoxy wearing coat over a conductive primer and prepared epoxy-primed base. The complete construction is approximately 0.6-0.8 mm, distinct from the thickness of the individual wearing coat. Novolac chemistry provides the chemical-resistance basis, while the grounding and footwear arrangement provides the static-control system. It is a smooth coating rather than a thick chemical-resistant broadcast floor.
Основные характеристики
Through-layer conductivity
The conductive wearing material forms part of the charge path throughout its thickness, rather than relying on a temporary surface treatment.
Compact smooth body
The shallow unbroadcast build can suit sound existing floors where additional screed depth would interfere with equipment clearances.
Технические параметры
| Resin Type | Two-component novolac epoxy |
|---|---|
| Total Build | 0.6-0.8 mm |
| Underlayers | Epoxy primer and conductive primer |
| Surface | Smooth nonporous coating |
| Electrical Construction | Through-thickness conductive wearing layer |
| Reference Conductive Range | 2.5 × 10⁴ to 1.0 × 10⁶ Ω |
| Footwear Arrangement | Compatible ESD footwear |
| Ground Connection | Via conductive underlayer |
| Chemical Duty | Selected chemical splash and spill exposure |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Applications
Appropriate for chemical-handling electronics rooms and pharmaceutical process support areas. Chemical identity, concentration and contact duration matter when selecting the resin package. The floor and ESD footwear should be considered together instead of treating a resistance value as a complete protection system.
Solutions for Your Application
The floor must handle chemical exposure as well as static-sensitive work.
Select the novolac wearing resin with the complete grounded ESD layer arrangement.
A standard novolac coating is assumed to provide ESD control.
Specify the conductive formulation and primer explicitly; the resin name alone does not establish static-control behaviour.
Доступные варианты
Choose colour, compatible cove and earthing configuration. Maintain the smooth unbroadcast architecture and discuss the actual chemical exposure so surface selection remains specific to the room.
Planning a Antistatic Epoxy Flooring Novolac Floor Coating specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
