İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Temiz Oda Duvar ve Tavan Sistemleri
Fenolik köpük temiz oda sandviç paneli
A compact insulated cleanroom panel using rigid phenolic foam between coated steel facings, selected where low thermal conductivity, reduced smoke generation and a thinner enclosure build-up are important.
- Rigid Phenolic Foam Core
- Düşük ısı iletkenliği
- Compact Insulation Thickness
- Smooth Hygienic Facings
Ürün tanıtımı
Phenolic Foam Cleanroom Sandwich Panels use a rigid thermoset foam core bonded between smooth metal skins. The fine closed-cell structure offers strong insulation at modest thickness and phenolic chemistry is known for comparatively low smoke production among rigid organic foams. Because phenolic foam is more brittle than PU or PIR, protected edges and controlled handling are especially important. When fully enclosed and accurately bonded, the panel provides a lightweight insulated wall or ceiling for controlled-temperature rooms where space efficiency is a major design consideration.
Ana Özellikler
Thermoset phenolic chemistry offers improved heat and smoke behavior compared with standard polystyrene foam.
Low core density keeps the completed enclosure light and easy to assemble.
Continuous steel facings protect the brittle foam from routine contact and cleaning.
Closed joint profiles maintain insulation continuity along the wall or ceiling line.
Uygulamanız için çözümler
The main purchasing concerns are brittle core edges, bond integrity, moisture protection and compatibility with service openings.
Phenolic foam can fracture at an unprotected edge during rough handling.Full perimeter closures and rigid packaging shield the core until the panel is installed.
Poor adhesive coverage can allow a brittle core to separate from the skin.Uniform lamination pressure and controlled adhesive application maintain full-face bonding.
Site-cut holes expose foam and create weak, irregular edges.Openings are factory prepared and finished with closed profiles before delivery.
Condensation at a discontinuous joint can bypass the high-performance insulation.Interlocking edges and continuous sealing preserve the thermal layer between panels.
Tipik uygulamalar
Temperature-controlled laboratoriesPharmaceutical storage and preparation roomsCompact cleanroom partitionsFood and biotechnology process areasInsulated cleanroom ceiling zones
Teknik parametreler
Typical manufacturing ranges for phenolic foam cleanroom panels are listed below.
| Temel malzemeler | Rigid closed-cell phenolic foam |
|---|---|
| Panel kalınlığı | 40, 50, 75 or 100 mm |
| Effective Width (Etkili Genişlik) | 950 veya 1150 mm |
| Maksimum uzunluk | 6000 mm |
| Çelik yüz yüze kalınlığı | 0.40-0.60mm |
| Core Density (Çekirdek Yoğunluğu) | 35–60 kg/m³ |
| Termal İletkenlik | 0.020–0.025 W/(m·K) |
| Yüzey bitirme | Polyester- or PVDF-coated galvanized steel |
| Ortak tip | Concealed tongue-and-groove joint with sealed core edge |
| Customization (Özelleşme) | Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir |
Mevcut Seçenekler
Alternative foam densityStainless steel process-side faceReinforced cut-out blocksCustom insulation thickness
Planning a Phenolic Foam Cleanroom Sandwich Panel specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
