English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Стенные и потолочные системы для чистых комнат
Сэндвич-панель из фенолической пены в чистых помещениях
A compact insulated cleanroom panel using rigid phenolic foam between coated steel facings, selected where low thermal conductivity, reduced smoke generation and a thinner enclosure build-up are important.
- Rigid Phenolic Foam Core
- Низкая теплопроводность
- Compact Insulation Thickness
- Smooth Hygienic Facings
Введение продукции
Phenolic Foam Cleanroom Sandwich Panels use a rigid thermoset foam core bonded between smooth metal skins. The fine closed-cell structure offers strong insulation at modest thickness and phenolic chemistry is known for comparatively low smoke production among rigid organic foams. Because phenolic foam is more brittle than PU or PIR, protected edges and controlled handling are especially important. When fully enclosed and accurately bonded, the panel provides a lightweight insulated wall or ceiling for controlled-temperature rooms where space efficiency is a major design consideration.
Основные характеристики
Thermoset phenolic chemistry offers improved heat and smoke behavior compared with standard polystyrene foam.
Low core density keeps the completed enclosure light and easy to assemble.
Continuous steel facings protect the brittle foam from routine contact and cleaning.
Closed joint profiles maintain insulation continuity along the wall or ceiling line.
Решения для вашего приложения
The main purchasing concerns are brittle core edges, bond integrity, moisture protection and compatibility with service openings.
Phenolic foam can fracture at an unprotected edge during rough handling.Full perimeter closures and rigid packaging shield the core until the panel is installed.
Poor adhesive coverage can allow a brittle core to separate from the skin.Uniform lamination pressure and controlled adhesive application maintain full-face bonding.
Site-cut holes expose foam and create weak, irregular edges.Openings are factory prepared and finished with closed profiles before delivery.
Condensation at a discontinuous joint can bypass the high-performance insulation.Interlocking edges and continuous sealing preserve the thermal layer between panels.
Типичные приложения
Temperature-controlled laboratoriesPharmaceutical storage and preparation roomsCompact cleanroom partitionsFood and biotechnology process areasInsulated cleanroom ceiling zones
Технические параметры
Typical manufacturing ranges for phenolic foam cleanroom panels are listed below.
| Основной материал | Rigid closed-cell phenolic foam |
|---|---|
| Толщина панели | 40, 50, 75 or 100 mm |
| эффективная ширина | 950 или 1150 мм |
| Максимальная длина | 6000 мм |
| Толщина линий стали | 0,40-0,60 мм |
| Плотность ядра | 35–60 kg/m³ |
| Теплопроводимость | 0.020–0.025 W/(m·K) |
| Поверхностная отделка | Polyester- or PVDF-coated galvanized steel |
| Объединенный тип | Concealed tongue-and-groove joint with sealed core edge |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
Alternative foam densityStainless steel process-side faceReinforced cut-out blocksCustom insulation thickness
Planning a Phenolic Foam Cleanroom Sandwich Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
