ผู้จัดจําหน่ายแบบครบวงจรสําหรับอุปกรณ์ห้องคลีนรูมและสิ่งจําเป็นสําหรับสิ่งอํานวยความสะดวกปลอดเชื้อการสนับสนุนโครงการระหว่างประเทศ
Open mobile navigationClose mobile navigation
STJH-VHP-PASS-BOX-600

VHP Pass Box 600 mm

A compact VHP transfer chamber for tools, bags and small thermolabile aseptic loads.
  • 600 mm 316 stainless chamber
  • H14 filtered process airflow
  • Compact aseptic transfer capacity
ขอใบเสนอราคา เรียกดูสินค้า

การแนะนําสินค้า

The 600 mm VHP pass box is the smallest chamber in this family, using a 600 x 600 x 600 mm 316 stainless interior within a 1200 x 660 x 2000 mm service enclosure. H14 filtration supports the controlled airflow path through conditioning, vapor exposure and aeration. Published family cycle time is 90–150 minutes and the release target is below 1 ppm residue, but both values require confirmation for the actual load and room interface.

คุณสมบัติที่สําคัญ

Small-load cycle efficiency

The compact volume avoids conditioning a large empty chamber when routine loads are tools, bags or small component kits.

Corrosion-resistant interior

316 stainless construction suits repeated exposure and cleaning within the vapor treatment zone.

Monitored aeration endpoint

The cycle can hold clean-side release until the configured low-residue condition is reached.

พารามิเตอร์ทางเทคนิค

Internal Chamber600 x 600 x 600 mm
External Dimensions1200 x 660 x 2000 mm
Chamber Material316 stainless steel
Final FilterH14
Source-Family Cycle Time90–150 min
Residue Release TargetBelow 1 ppm, subject to cycle validation
Process StagesConditioning, VHP exposure and aeration
Load TypeTools, bags and compact aseptic loads
InstallationIntegrated wall transfer system
การปรับแต่งสามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน

Applications

For small sterile material loads entering pharmaceutical, biotechnology and aseptic processing areas without high-temperature treatment. Product compatibility, hydrogen-peroxide absorption and aeration time must be tested with the actual load rather than inferred from empty-chamber performance.

Solutions for Your Application

A large VHP chamber wastes cycle time and vapor on small daily loads.Use the 600 mm chamber to match the treatment volume to compact tools and bagged components.
Absorbent materials may retain peroxide after the nominal cycle ends.Develop the cycle with the worst-case load and release only after the installed concentration monitor reaches the approved endpoint.

ตัวเลือกที่มีอยู่

Define VHP generator interface, concentration sensing, door orientation, cycle recipe access, printer or data export and emergency aeration logic. Final cycle performance depends on load material and packing density.

Planning a VHP Pass Box 600 mm specification?

ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

พูดคุยกับทีมงานของเรา
อีเมลถึงเรา WhatsApp WeChat

หน้าแรก

ผลิตภัณฑ์

ข่าวสาร

เกี่ยวกับเรา

ติดต่อเรา