STjh compact 600 mm VHP biodecontamination pass box with 316 stainless chamber, H14 plenum and lower generator bay

STJH-VHP-PASS-BOX-600

VHP Pass Box 600 mm

A compact VHP transfer chamber for tools, bags and small thermolabile aseptic loads.

600 mm 316 stainless chamber
H14 filtered process airflow
Compact aseptic transfer capacity

Bitte senden Sie eine Anfrage. Browse Produkte

Produkteinführung

The 600 mm VHP pass box is the smallest chamber in this family, using a 600 x 600 x 600 mm 316 stainless interior within a 1200 x 660 x 2000 mm service enclosure. H14 filtration supports the controlled airflow path through conditioning, vapor exposure and aeration. Published family cycle time is 90–150 minutes and the release target is below 1 ppm residue, but both values require confirmation for the actual load and room interface.

Key Features

Small-load cycle efficiency

The compact volume avoids conditioning a large empty chamber when routine loads are tools, bags or small component kits.

Corrosion-resistant interior

316 stainless construction suits repeated exposure and cleaning within the vapor treatment zone.

Monitored aeration endpoint

The cycle can hold clean-side release until the configured low-residue condition is reached.

Technische Parameter

Internal Chamber	600 x 600 x 600 mm
External Dimensions	1200 x 660 x 2000 mm
Chamber Material	316 stainless steel
Final Filter	H14
Source-Family Cycle Time	90–150 min
Residue Release Target	Below 1 ppm, subject to cycle validation
Process Stages	Conditioning, VHP exposure and aeration
Load Type	Tools, bags and compact aseptic loads
Installation	Integrated wall transfer system
Customisierung	Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung.

Applications

For small sterile material loads entering pharmaceutical, biotechnology and aseptic processing areas without high-temperature treatment. Product compatibility, hydrogen-peroxide absorption and aeration time must be tested with the actual load rather than inferred from empty-chamber performance.

Solutions for Your Application

A large VHP chamber wastes cycle time and vapor on small daily loads.Use the 600 mm chamber to match the treatment volume to compact tools and bagged components.

Absorbent materials may retain peroxide after the nominal cycle ends.Develop the cycle with the worst-case load and release only after the installed concentration monitor reaches the approved endpoint.

Verfügbare Optionen

Define VHP generator interface, concentration sensing, door orientation, cycle recipe access, printer or data export and emergency aeration logic. Final cycle performance depends on load material and packing density.

Planning a VHP Pass Box 600 mm specification?

Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.

Sprechen Sie mit unserem Team