ผู้จัดจําหน่ายแบบครบวงจรสําหรับอุปกรณ์ห้องคลีนรูมและสิ่งจําเป็นสําหรับสิ่งอํานวยความสะดวกปลอดเชื้อการสนับสนุนโครงการระหว่างประเทศ
Open mobile navigationClose mobile navigation
หน้าแรก / ผลิตภัณฑ์ / Cleanroom Air Filters / Photocatalytic Oxidation Filter Module 18 W 2600 m3/h
STJH-PCO-MODULE-18W-2600

Photocatalytic Oxidation Filter Module 18 W 2600 m3/h

A mid-size monitored photocatalytic module for medium duct branches and cleanroom support-air systems.
  • 2600 m3/h medium duty
  • 18 W UV-C source
  • 371 mm active section
ขอใบเสนอราคา เรียกดูสินค้า

การแนะนําสินค้า

This 18 W version extends the active section to 371 mm and raises the supported airflow to 2600 m3/h. It gives medium AHUs more treatment length than the compact 10 W model without the installation envelope of the 28 W unit. Airflow sensing, digital lamp-life indication and alarm ports support planned maintenance, while pollutant reduction remains dependent on the actual contaminant, contact conditions and a clean photocatalytic surface.

คุณสมบัติที่สําคัญ

Intermediate airflow capacity

The 2600 m3/h rating covers medium ductwork between the compact and high-volume configurations.

Longer reaction zone

A 371 mm section increases illuminated photocatalyst area compared with the 10 W module.

Control-ready package

Alarm and control terminals allow lamp and airflow status to be integrated with the air-system controls.

พารามิเตอร์ทางเทคนิค

Electrical Power18 W
Supply220-240 V, 50/60 Hz
Rated Current0.095 A
Overall Dimensions250 x 157 x 443 mm
Treatment Section Length371 mm
Maximum Airflow2600 m3/h
Ingress ProtectionIP20
Treatment MethodUV-C activated TiO2 photocatalysis
ControlsAirflow sensor, digital life display and alarm ports
การปรับแต่งสามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน

Applications

Suited to medium cleanroom make-up or recirculation branches, commercial AHUs and controlled-process ventilation requiring a monitored PCO stage.

Solutions for Your Application

The PCO section is installed where maintenance access to the lamp is blocked.Reserve the full withdrawal envelope and place an isolated service opening beside the 371 mm treatment section.
Dust accumulation masks the catalyst and reduces treatment performance.Use effective upstream particle filtration and include catalyst and lamp cleaning in the planned maintenance routine.

ตัวเลือกที่มีอยู่

Select mounting orientation, duct penetration, control wiring, alarm logic, upstream filter grade and service interval for the actual air stream.

Planning a Photocatalytic Oxidation Filter Module 18 W 2600 m3/h specification?

ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

พูดคุยกับทีมงานของเรา
อีเมลถึงเรา WhatsApp WeChat

หน้าแรก

ผลิตภัณฑ์

ข่าวสาร

เกี่ยวกับเรา

ติดต่อเรา