ภาษาอังกฤษ
ภาษาโปรตุเกส
ภาษาสเปน
ภาษามาเลย์
ภาษาอินโดนีเซีย
ภาษาเยอรมัน
ภาษาตุรกี
ภาษาเวียดนาม
ฝรั่งเศส
ภาษารัสเซีย
ภาษาอาหรับ
ภาษาไทยปัจจุบัน
ภาษาญี่ปุ่น
ภาษาเกาหลี
One station for changing layouts
The air-treatment components travel with the supporting frame when an indoor work cell is rearranged.
อุปกรณ์กําจัดปนเปื้อนบุคลากรและวัสดุ
Mobile Ionizing บุคลากรพอร์ทัลเป่า
A doorless ionizing blow-off portal on a lockable mobile base for ordinary garment particles at changing indoor work cells.
- พอร์ทัลมือถือ Doorlessรายละเอียดเพิ่มเติม:
- ฐานล้อล็อคได้รายละเอียดเพิ่มเติม:
- Ionizing Air Treatment
- Relocatable Work-Cell Station
การแนะนําสินค้า
This mobile unit is a doorless ionizing pass-through portal, not a wheeled enclosed air-shower booth. Side housings carry the air equipment and ionizing components, while a bridged frame defines the personnel opening. The wheeled support lets the station follow changes in an indoor work-cell layout; locking casters and adjustable feet secure its operating position. Removable covers provide access to the service components without treating the frame as a permanent partition.
คุณสมบัติที่สําคัญ
No door-opening sequence
The unenclosed treatment position avoids adding swing-door clearance around a temporary workstation.
Static-cling treatment
Ionizing elements supplement the air stream where electrostatic attraction makes loose particles cling to garments.
Serviceable emitter area
Access to the ionizing components allows their cleaning needs to be considered alongside filter replacement.
โซลูชันสำหรับแอปพลิเคชันของคุณ
A movable treatment point needs a repeatable setup each time its location changes.
The temporary production line moves before a fixed installation would be useful.Plan a suitable relocation route and reconnect the complete station at the next defined garment-treatment position.
The frame shifts on an uneven floor during personnel passage.Use the locking and leveling arrangement on a stable support surface, with the base outside the intended walking line.
Particle adhesion changes after the portal is moved closer to a work surface.Check emitter cleanliness, garment-to-outlet distance and the actual ionizing treatment rather than assuming the previous position's result is unchanged.
Loose particles are blown toward nearby exposed work.Reposition the treatment point and review its air collection or extraction arrangement; an open frame alone cannot contain the released material.
การใช้งานทั่วไป
Pilot-production gowning pointsReconfigured electronics assembly cellsTemporary optical-assembly preparation areasIndoor personnel-entry layout trials
Suitable tasks concern ordinary loose garment particles and static attraction. Hazardous powders, combustible dust and chemical or biological decontamination are outside this general-purpose portal configuration.
พารามิเตอร์ทางเทคนิค
These are common selectable construction and utility references for a blower-based mobile ionizing portal. They describe configuration choices, not measured performance or an as-built rating for one STjh unit.
| รูปแบบอุปกรณ์ | Doorless personnel portal with side equipment housings and an open connecting frame |
|---|---|
| Mobile Support | Wheeled base with locking casters and adjustable leveling feet |
| Construction Options | Coated steel equipment housings with steel or aluminum support framing |
| Air Supply Configuration | Electric blower feeding filtered air to garment-facing outlets |
| Ionizing Assembly | Ionizing emitters positioned in the treatment air path |
| Outlet Arrangement | Side-mounted outlet banks; adjustable stainless steel nozzle option |
| Filtration Options | Replaceable prefilter and HEPA final filter; H14 element option |
| Start and Timing Options | Manual or photoelectric start with an adjustable blowing interval |
| Electrical Supply References | 110–120 or 220–240 V AC, single-phase, 50/60 Hz supply variants |
| การเข้าถึงบริการ | Removable equipment covers for filter, blower and ionizing-component maintenance |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Alternative frame width and heightStainless steel outlet fittingsHEPA final-filter selectionPhotoelectric start and status indicationDestination-specific electrical supply
The basic arrangement is an open portal on a lockable wheeled base with an ionizing air-treatment package. The blower, filtration, controls and service clearances are selected as one configuration. A partition connector or access ramp is a separate interface option, not an airtight boundary or an automatic part of the mobile base.
Selection and Installation
Plan the move and the operating position separately
Allow for the complete frame, caster sweep, floor joints and the route between work cells. Move the portal only after shutdown and disconnection of its services. Lock the casters and set the leveling feet on a suitable level floor before use; wheels do not provide permanent stability by themselves. Keep the pedestrian approach clear of the base and service cables.
Identify the complete air package
The reference arrangement uses an electric blower and filtered supply air. A compressed-air ionizing head is a different utility package: its pressure, consumption and suitability for personnel use cannot be inferred from an industrial parts-cleaning nozzle. Specify the supply source, filters, inlet path and outlet arrangement together. An inlet grille is not proof that released particles are captured.
Maintain the ionizing components after relocation
Include emitter access and the manufacturer's cleaning method in routine maintenance. Check treatment at the actual working distance and garment position after a move. Ionization can address static attraction, but it does not establish a charge-decay result, ion balance, ozone limit or an ESD-compliant personnel grounding system.
Keep an open portal within its intended task
Select this format for ordinary non-hazardous garment particles where an enclosed entry chamber is not required. Evaluate nearby room air currents and the destination of dislodged particles before positioning it near exposed work. This is not a sealed cleanroom boundary, a sterilizer or hazardous-dust containment equipment. For a permanent doorway arrangement instead of a movable base, compare the fixed doorway blow-off portal.
วางแผนข้อกําหนดพอร์ทัลเป่าไอออนสําหรับบุคลากรมือถือ?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ
