Portal Blow-Off Personel Pengion Mudah Alih

Pengenalan Produk

This mobile unit is a doorless ionizing pass-through portal, not a wheeled enclosed air-shower booth. Side housings carry the air equipment and ionizing components, while a bridged frame defines the personnel opening. The wheeled support lets the station follow changes in an indoor work-cell layout; locking casters and adjustable feet secure its operating position. Removable covers provide access to the service components without treating the frame as a permanent partition.

Ciri-ciri Utama

Penyelesaian untuk permohonan anda

A movable treatment point needs a repeatable setup each time its location changes.

Permohonan yang biasa

Suitable tasks concern ordinary loose garment particles and static attraction. Hazardous powders, combustible dust and chemical or biological decontamination are outside this general-purpose portal configuration.

Parameter teknikal

These are common selectable construction and utility references for a blower-based mobile ionizing portal. They describe configuration choices, not measured performance or an as-built rating for one STjh unit.

Pilihan yang boleh didapati

The basic arrangement is an open portal on a lockable wheeled base with an ionizing air-treatment package. The blower, filtration, controls and service clearances are selected as one configuration. A partition connector or access ramp is a separate interface option, not an airtight boundary or an automatic part of the mobile base.

Selection and Installation

Plan the move and the operating position separately

Allow for the complete frame, caster sweep, floor joints and the route between work cells. Move the portal only after shutdown and disconnection of its services. Lock the casters and set the leveling feet on a suitable level floor before use; wheels do not provide permanent stability by themselves. Keep the pedestrian approach clear of the base and service cables.

Identify the complete air package

The reference arrangement uses an electric blower and filtered supply air. A compressed-air ionizing head is a different utility package: its pressure, consumption and suitability for personnel use cannot be inferred from an industrial parts-cleaning nozzle. Specify the supply source, filters, inlet path and outlet arrangement together. An inlet grille is not proof that released particles are captured.

Maintain the ionizing components after relocation

Include emitter access and the manufacturer's cleaning method in routine maintenance. Check treatment at the actual working distance and garment position after a move. Ionization can address static attraction, but it does not establish a charge-decay result, ion balance, ozone limit or an ESD-compliant personnel grounding system.

Keep an open portal within its intended task

Select this format for ordinary non-hazardous garment particles where an enclosed entry chamber is not required. Evaluate nearby room air currents and the destination of dislodged particles before positioning it near exposed work. This is not a sealed cleanroom boundary, a sterilizer or hazardous-dust containment equipment. For a permanent doorway arrangement instead of a movable base, compare the fixed doorway blow-off portal.