ภาษาอังกฤษ
ภาษาโปรตุเกส
ภาษาสเปน
ภาษามาเลย์
ภาษาอินโดนีเซีย
ภาษาเยอรมัน
ภาษาตุรกี
ภาษาเวียดนาม
ฝรั่งเศส
ภาษารัสเซีย
ภาษาอาหรับ
ภาษาไทยปัจจุบัน
ภาษาญี่ปุ่น
ภาษาเกาหลี
อุปกรณ์กําจัดปนเปื้อนบุคลากรและวัสดุ
ห้องถ่ายโอนวัสดุห้องสะอาดขนาดใหญ่
A large-format interlocked pass-through for transferring carts, equipment and bulky packaged materials across a cleanroom boundary.
- Oversized Transfer Volume
- Wide Equipment Doors
- Reinforced Cargo Floor
- Interlocked Access
การแนะนําสินค้า
This large material transfer chamber extends the pass-through principle to loads that cannot be handed through a wall-mounted cabinet. A framed enclosure surrounds the equipment route, with stainless internal surfaces and access doors at the two transfer faces. The floor interface can use a reinforced deck or connect directly to the finished room floor. Its size and door layout follow the handling route rather than a standard small-box footprint.
คุณสมบัติที่สําคัญ
Interlocking keeps the opposite access side closed during loading.
Cleanable interior joints reduce awkward ledges around bulk packaging.
Roll-in access avoids lifting heavy loads onto a cabinet shelf.
Optional ventilation connections add air treatment where the transfer process needs it.
โซลูชันสำหรับแอปพลิเคชันของคุณ
The practical challenge is moving the whole load through the boundary without creating a handling bottleneck.
A tall equipment frame fits the chamber but catches the door opening.Use the clear door dimensions, not the outside cabinet dimensions, to select the opening around the highest and widest points.
Small trolley wheels stop at a raised threshold.Choose a floor-continuous passage or a deck-and-ramp arrangement suited to the wheel size and approach space.
A long load prevents the first door from closing.Allow enough internal depth for the entire load to clear both closing planes before the next door is released.
Bulky wrapping carries loose debris to the receiving side.Provide an unpacking and wipe-down point before entry, then keep the chamber floor and internal corners accessible for cleaning.
การใช้งานทั่วไป
Mobile equipment entry to clean manufacturing roomsCart-mounted components for medical-device assemblyBulk packaged supplies between controlled roomsPilot-plant racks and process accessories
พารามิเตอร์ทางเทคนิค
The following are selectable reference configurations for large trolley and equipment pass-throughs, not measured performance for one fixed model. The usual starting configuration is a stainless enclosure with opposing interlocked doors and a roll-in floor interface; powered ventilation and alternative door systems are optional.
| Chamber Type | Floor-mounted material pass-through for carts and wheeled equipment |
|---|---|
| Enclosure Material | 304 stainless steel; 316L stainless steel available as an option |
| Door Opening Options | Single-leaf clear widths up to 1000 mm; double-leaf arrangements for wider loads |
| Clear Height Option | Tall transfer layouts with clear heights up to 2100 mm |
| Floor Interface | Reinforced deck with low-profile ramps, or an open-bottom layout continuous with the facility floor |
| การจัดประตู | Opposing access doors with single or double leaves and gasketed closing edges |
| การเชื่อมโยง | Mechanical interlock; electromechanical interlock with status indication or timed release as an option |
| Interior Finish | Satin or brushed stainless steel with smooth, cleanable internal joints |
| Air Handling | Passive transfer enclosure; filtered air supply or extract connections available as options |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
The basic transfer arrangement does not require active air treatment. Select the following additions for the load and room layout.
316L stainless steel or electropolished interiorViewing windows and door-status indicationElectromechanical timed interlockFiltered purge or recirculating HEPA moduleLow-profile ramps or a floor-continuous interfaceAlternative door systems for restricted approach space
Selection and Installation
Size the passage around the fully loaded trolley or equipment, including handles, packaging and protruding fittings. Record the load mass, wheel positions, turning space and the height difference between the two finished floors. A raised cargo deck needs a suitable approach ramp, while a floor-continuous layout relies on the facility floor as the rolling surface.
Keep the door swing and maintenance access clear on both sides. Set the unloading position so the receiving operator can remove the complete load before closing the door. For smaller materials that need a chilled handover, the กล่องผ่านห้องสะอาดแบบทําความเย็น provides a different, actively cooled transfer arrangement.
Planning a Large Cleanroom Material Transfer Chamber specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ
