English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Персонал и оборудование для дезактивации материалов
Большая камера для передачи материалов в чистой комнате
A large-format interlocked pass-through for transferring carts, equipment and bulky packaged materials across a cleanroom boundary.
- Oversized Transfer Volume
- Wide Equipment Doors
- Reinforced Cargo Floor
- Interlocked Access
Введение продукции
This large material transfer chamber extends the pass-through principle to loads that cannot be handed through a wall-mounted cabinet. A framed enclosure surrounds the equipment route, with stainless internal surfaces and access doors at the two transfer faces. The floor interface can use a reinforced deck or connect directly to the finished room floor. Its size and door layout follow the handling route rather than a standard small-box footprint.
Основные характеристики
Interlocking keeps the opposite access side closed during loading.
Cleanable interior joints reduce awkward ledges around bulk packaging.
Roll-in access avoids lifting heavy loads onto a cabinet shelf.
Optional ventilation connections add air treatment where the transfer process needs it.
Решения для вашего приложения
The practical challenge is moving the whole load through the boundary without creating a handling bottleneck.
A tall equipment frame fits the chamber but catches the door opening.Use the clear door dimensions, not the outside cabinet dimensions, to select the opening around the highest and widest points.
Small trolley wheels stop at a raised threshold.Choose a floor-continuous passage or a deck-and-ramp arrangement suited to the wheel size and approach space.
A long load prevents the first door from closing.Allow enough internal depth for the entire load to clear both closing planes before the next door is released.
Bulky wrapping carries loose debris to the receiving side.Provide an unpacking and wipe-down point before entry, then keep the chamber floor and internal corners accessible for cleaning.
Типичные приложения
Mobile equipment entry to clean manufacturing roomsCart-mounted components for medical-device assemblyBulk packaged supplies between controlled roomsPilot-plant racks and process accessories
Технические параметры
The following are selectable reference configurations for large trolley and equipment pass-throughs, not measured performance for one fixed model. The usual starting configuration is a stainless enclosure with opposing interlocked doors and a roll-in floor interface; powered ventilation and alternative door systems are optional.
| Chamber Type | Floor-mounted material pass-through for carts and wheeled equipment |
|---|---|
| Enclosure Material | 304 stainless steel; 316L stainless steel available as an option |
| Door Opening Options | Single-leaf clear widths up to 1000 mm; double-leaf arrangements for wider loads |
| Clear Height Option | Tall transfer layouts with clear heights up to 2100 mm |
| Интерфейс пола | Reinforced deck with low-profile ramps, or an open-bottom layout continuous with the facility floor |
| Расположение дверей | Opposing access doors with single or double leaves and gasketed closing edges |
| Сцепление | Mechanical interlock; electromechanical interlock with status indication or timed release as an option |
| Interior Finish | Satin or brushed stainless steel with smooth, cleanable internal joints |
| Air Handling | Passive transfer enclosure; filtered air supply or extract connections available as options |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
The basic transfer arrangement does not require active air treatment. Select the following additions for the load and room layout.
316L stainless steel or electropolished interiorViewing windows and door-status indicationElectromechanical timed interlockFiltered purge or recirculating HEPA moduleLow-profile ramps or a floor-continuous interfaceAlternative door systems for restricted approach space
Selection and Installation
Size the passage around the fully loaded trolley or equipment, including handles, packaging and protruding fittings. Record the load mass, wheel positions, turning space and the height difference between the two finished floors. A raised cargo deck needs a suitable approach ramp, while a floor-continuous layout relies on the facility floor as the rolling surface.
Keep the door swing and maintenance access clear on both sides. Set the unloading position so the receiving operator can remove the complete load before closing the door. For smaller materials that need a chilled handover, the Refrigerated Cleanroom Pass Box (Коробка для проезда в холодильнике) provides a different, actively cooled transfer arrangement.
Planning a Large Cleanroom Material Transfer Chamber specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
