ตู้เก็บของผ่านห้องสะอาด
- Full-height transfer volume
- Adjustable stainless shelves
- Opposed interlocked doors
- Floor-supported construction
การแนะนําสินค้า
This Cleanroom Pass-Through Storage Cabinet turns a wall boundary into an organised restocking point for boxed consumables, trays and prepared materials. The cabinet's removable shelf system can be set for several small batches or cleared for taller containers. Interlocked doors maintain separated loading and collection sides, while the floor-supported cabinet body accommodates more stored material than a compact wall pass box.
คุณสมบัติที่สําคัญ
Shelf rails permit the storage layout to be changed without altering the cabinet body.
Solid or perforated shelf choices can suit different packages and wiping practices.
A reinforced base supports regularly loaded transfer volumes.
Opposing doors can be interlocked to separate loading from clean-side retrieval.
โซลูชันสำหรับแอปพลิเคชันของคุณ
Facilities that transfer an entire shift's supplies need more volume and better organisation than a small pass box can provide.
การใช้งานทั่วไป
พารามิเตอร์ทางเทคนิค
The table gives selectable common reference configurations for a full-height pass-through storage cabinet, not measured data for one fixed STjh model. The reference arrangement is a floor-supported stainless steel cabinet with adjustable shelves and opposing interlocked doors. It is static storage without a fan or filter module; material, shelving and door upgrades are optional.
| วัสดุตู้เก็บของ | AISI 304 stainless steel; AISI 316 stainless steel optional |
|---|---|
| Overall Dimensions (W × D × H) | 1000 × 600 × 2000 mm common full-height reference |
| เสร็จสิ้นพื้นผิว | Brushed stainless steel, commonly No. 4 finish |
| ชั้นวางเข้าลิ้นชัก | Height-adjustable, removable stainless steel shelves |
| การจัดประตู | Opposing full-height hinged doors |
| ประตู INTERLOCK | One-side-at-a-time access; electronic interlock available |
| Storage Configuration | Multiple shelf levels for packaged supplies and trays |
| Base and Installation | Floor-supported through-wall cabinet with perimeter trim |
| Optional Fittings | Additional shelves, shelf dividers and glazed doors |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Selection and Installation
Start with the number of packs held between replenishment rounds, their dimensions and their combined weight on each shelf. Choose shelf spacing to leave hand clearance above the tallest pack, and keep heavier items at comfortable lower levels. Overall cabinet width and height are different from the usable opening and shelf area.
The base must carry the loaded cabinet, while the perimeter trim closes the gap at the wall. Allow the full door swing on both sides and enough aisle space to remove a shelf for cleaning. Specify the interlock type, release sequence and electrical supply if electronic locking is selected.
Use this cabinet for enclosed staging and two-sided restocking; filtration or an air-purge cycle is a separate equipment choice. When only a few documents or small packs pass at a time, a compact transfer hatch uses less wall space.
Planning a Cleanroom Pass-Through Storage Cabinet specification?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ

ภาษาอังกฤษ
ภาษาโปรตุเกส
ภาษาสเปน
ภาษามาเลย์
ภาษาอินโดนีเซีย
ภาษาเยอรมัน
ภาษาตุรกี
ภาษาเวียดนาม
ฝรั่งเศส
ภาษารัสเซีย
ภาษาอาหรับ
ภาษาไทยปัจจุบัน
ภาษาญี่ปุ่น
ภาษาเกาหลี