Gabinete de almacenamiento paso a través de sala limpia
- Full-height transfer volume
- Adjustable stainless shelves
- Opposed interlocked doors
- Floor-supported construction
Introducción del producto
This Cleanroom Pass-Through Storage Cabinet turns a wall boundary into an organised restocking point for boxed consumables, trays and prepared materials. The cabinet's removable shelf system can be set for several small batches or cleared for taller containers. Interlocked doors maintain separated loading and collection sides, while the floor-supported cabinet body accommodates more stored material than a compact wall pass box.
Características clave
Shelf rails permit the storage layout to be changed without altering the cabinet body.
Solid or perforated shelf choices can suit different packages and wiping practices.
A reinforced base supports regularly loaded transfer volumes.
Opposing doors can be interlocked to separate loading from clean-side retrieval.
Soluciones para su aplicación
Facilities that transfer an entire shift's supplies need more volume and better organisation than a small pass box can provide.
Aplicaciones típicas
Parámetros técnicos
The table gives selectable common reference configurations for a full-height pass-through storage cabinet, not measured data for one fixed STjh model. The reference arrangement is a floor-supported stainless steel cabinet with adjustable shelves and opposing interlocked doors. It is static storage without a fan or filter module; material, shelving and door upgrades are optional.
| Material del gabinete | AISI 304 stainless steel; AISI 316 stainless steel optional |
|---|---|
| Overall Dimensions (W × D × H) | 1000 × 600 × 2000 mm common full-height reference |
| Superficie acabada | Brushed stainless steel, commonly No. 4 finish |
| Estantes | Height-adjustable, removable stainless steel shelves |
| Arreglo de la puerta | Opposing full-height hinged doors |
| Interbloqueo de puerta | One-side-at-a-time access; electronic interlock available |
| Storage Configuration | Multiple shelf levels for packaged supplies and trays |
| Base and Installation | Floor-supported through-wall cabinet with perimeter trim |
| Optional Fittings | Additional shelves, shelf dividers and glazed doors |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Selection and Installation
Start with the number of packs held between replenishment rounds, their dimensions and their combined weight on each shelf. Choose shelf spacing to leave hand clearance above the tallest pack, and keep heavier items at comfortable lower levels. Overall cabinet width and height are different from the usable opening and shelf area.
The base must carry the loaded cabinet, while the perimeter trim closes the gap at the wall. Allow the full door swing on both sides and enough aisle space to remove a shelf for cleaning. Specify the interlock type, release sequence and electrical supply if electronic locking is selected.
Use this cabinet for enclosed staging and two-sided restocking; filtration or an air-purge cycle is a separate equipment choice. When only a few documents or small packs pass at a time, a compact transfer hatch uses less wall space.
Planning a Cleanroom Pass-Through Storage Cabinet specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.

Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano