STJH-TERMINAL-HEPA-H14-305X610X70

Terminal HEPA Filter 305 × 610 × 70 mm H14

A narrow H14 terminal panel with a documented 286 m3/h duty for perimeter and corridor ceiling grids.

305 × 610 mm half module
286 m3/h rated airflow
H14 at 145 Pa initial resistance

Solicite un presupuesto. Browse productos

Introducción del producto

This 305 × 610 × 70 mm H14 panel occupies a half-width terminal opening. It delivers 286 m3/h at a 0.45 m/s face velocity and 145 Pa initial resistance. The narrow form is intended for perimeter zones, corridors and ceiling layouts where lights, sprinklers or structural members prevent use of a full-square HEPA module.

Características clave

Narrow ceiling integration

The 305 mm width serves perimeter strips and service-congested grid positions without blanking half a full module.

Defined terminal velocity

A 0.45 m/s face velocity provides a documented basis for local airflow and diffuser selection.

H14 fractional coverage

The panel maintains H14 final filtration in areas that cannot accept a 610 mm square filter.

Parámetros técnicos

Panel Dimensions	305 × 610 × 70 mm
HEPA Classification	H14
Rated Airflow	286 m3/h
Initial Pressure Drop	145 Pa
Face Velocity	0.45 m/s
Module Width	Half module, 305 mm
Pack Depth	70 mm
Terminal Position	Perimeter, corridor or narrow grid
Air Distribution	Matched terminal diffuser or housing
Customization	Disponible según la aplicación prevista y el entorno operativo.

Applications

Used at cleanroom perimeters, narrow corridors, pass-through approaches and ceiling bays constrained by building services. It allows a fractional terminal layout while providing a defined H14 airflow point for balancing.

Solutions for Your Application

A full 610 mm module conflicts with ceiling services at the room perimeter.Use the 305 mm-wide terminal panel to preserve filtered coverage in the remaining half bay.

A narrow terminal is overdriven to match a full-module airflow.Balance the panel around its documented 286 m3/h and 0.45 m/s operating point.

Opciones disponibles

Specify gasket or gel edge, frame profile, faceguard and diffuser interface for the 305 × 610 mm ceiling position.

Planning a Terminal HEPA Filter 305 × 610 × 70 mm H14 specification?

Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.

Habla con nuestro equipo