Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Dense hybrid body
Polyurethane and cementitious components combine in a substantial wearing layer suited to industrial mechanical exposure.
STJH-HEAVY-DUTY-POLYURETHANE-CEMENT-FLOORING-SMOOTH-46MM
Heavy-Duty Polyurethane Cement Flooring 4–6 mm Smooth
A dense polyurethane-cement floor with a smooth exposed face for heavy service in predominantly dry process areas.
- 4-6 mm hybrid mineral-resin build
- Smooth exposed surface
- Heavy-duty dry-process configuration
About This Product
SMOOTH-46MM uses a water-based polyurethane-cement hybrid rather than neat polyurethane resin. Its 4-6 mm mineral-rich construction forms a dense wearing floor, with a smooth finish selected for straightforward cleaning. The model belongs to the dry-process side of the heavy-duty family. It does not carry the aggregate broadcast of the wet-traction version or the deep body of the high-temperature system.
Características clave
Smooth cleaning contact
The unbroadcast face allows cleaning pads and squeegees to contact the floor without navigating a coarse traction profile.
Thickness-linked thermal selection
Heat exposure is considered against the chosen depth; a thinner installation should not be assigned the limits of a much thicker system.
Parámetros técnicos
| Chemistry | Water-based polyurethane-cement hybrid |
|---|---|
| System Thickness | 4-6 mm |
| Superficie acabada | Smooth |
| Placement | Flow or trowel application with deaeration |
| Typical Base | Prepared concrete |
| Primer | Compatible hybrid primer or scratch layer |
| Temperature Reference | -15 to +70 °C for 4 mm construction |
| Process Condition | Predominantly dry |
| Traffic Duty | Heavy internal industrial use |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Applications
Suitable for dry pharmaceutical production, packaging and manufacturing support floors exposed to trolley traffic and occasional chemicals. Choose a textured alternative where water or other contaminants regularly remain on the walking surface. The cleaning method should reflect the substances actually used in the room.
Solutions for Your Application
A smooth floor is required but a thin coating lacks wearing depth.
Use the mineral-rich hybrid body at the selected 4-6 mm thickness.
The purchaser assumes all PU-cement thicknesses tolerate the same heat.
Match the actual thermal exposure with the specified construction depth rather than the resin-family name.
Opciones disponibles
Select colour, cove geometry and thickness within the supported range. Plan local falls and drainage before finishing, while keeping this model's smooth surface identity clear.
Planning a Heavy-Duty Polyurethane Cement Flooring 4–6 mm Smooth specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
