Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Dense hybrid body
Polyurethane and cementitious components combine in a substantial wearing layer suited to industrial mechanical exposure.
STJH-HEAVY-DUTY-POLYURETHANE-CEMENT-FLOORING-SMOOTH-46MM
Heavy-Duty Polyurethane Cement Flooring 4–6 mm Smooth
A dense polyurethane-cement floor with a smooth exposed face for heavy service in predominantly dry process areas.
- 4-6 mm hybrid mineral-resin build
- Smooth exposed surface
- Heavy-duty dry-process configuration
About This Product
SMOOTH-46MM uses a water-based polyurethane-cement hybrid rather than neat polyurethane resin. Its 4-6 mm mineral-rich construction forms a dense wearing floor, with a smooth finish selected for straightforward cleaning. The model belongs to the dry-process side of the heavy-duty family. It does not carry the aggregate broadcast of the wet-traction version or the deep body of the high-temperature system.
Características-chave
Smooth cleaning contact
The unbroadcast face allows cleaning pads and squeegees to contact the floor without navigating a coarse traction profile.
Thickness-linked thermal selection
Heat exposure is considered against the chosen depth; a thinner installation should not be assigned the limits of a much thicker system.
Parâmetros técnicos
| Chemistry | Water-based polyurethane-cement hybrid |
|---|---|
| System Thickness | 4-6 mm |
| Superfície acabado | Smooth |
| Placement | Flow or trowel application with deaeration |
| Typical Base | Prepared concrete |
| Primer | Compatible hybrid primer or scratch layer |
| Temperature Reference | -15 to +70 °C for 4 mm construction |
| Process Condition | Predominantly dry |
| Traffic Duty | Heavy internal industrial use |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Applications
Suitable for dry pharmaceutical production, packaging and manufacturing support floors exposed to trolley traffic and occasional chemicals. Choose a textured alternative where water or other contaminants regularly remain on the walking surface. The cleaning method should reflect the substances actually used in the room.
Solutions for Your Application
A smooth floor is required but a thin coating lacks wearing depth.
Use the mineral-rich hybrid body at the selected 4-6 mm thickness.
The purchaser assumes all PU-cement thicknesses tolerate the same heat.
Match the actual thermal exposure with the specified construction depth rather than the resin-family name.
Opções disponíveis
Select colour, cove geometry and thickness within the supported range. Plan local falls and drainage before finishing, while keeping this model's smooth surface identity clear.
Planning a Heavy-Duty Polyurethane Cement Flooring 4–6 mm Smooth specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
