STJH SMOOTH-46MM polyurethane-cement sample with a smooth face and dense mineral cut edge on white

STJH-HEAVY-DUTY-POLYURETHANE-CEMENT-FLOORING-SMOOTH-46MM

Heavy-Duty Polyurethane Cement Flooring 4–6 mm Smooth

A dense polyurethane-cement floor with a smooth exposed face for heavy service in predominantly dry process areas.

4-6 mm hybrid mineral-resin build
Smooth exposed surface
Heavy-duty dry-process configuration

Permintaan sebut harga Semak imbas produk

About This Product

SMOOTH-46MM uses a water-based polyurethane-cement hybrid rather than neat polyurethane resin. Its 4-6 mm mineral-rich construction forms a dense wearing floor, with a smooth finish selected for straightforward cleaning. The model belongs to the dry-process side of the heavy-duty family. It does not carry the aggregate broadcast of the wet-traction version or the deep body of the high-temperature system.

Ciri-ciri Utama

Dense hybrid body

Polyurethane and cementitious components combine in a substantial wearing layer suited to industrial mechanical exposure.

Smooth cleaning contact

The unbroadcast face allows cleaning pads and squeegees to contact the floor without navigating a coarse traction profile.

Thickness-linked thermal selection

Heat exposure is considered against the chosen depth; a thinner installation should not be assigned the limits of a much thicker system.

Parameter teknikal

Chemistry	Water-based polyurethane-cement hybrid
System Thickness	4-6 mm
Kemasan permukaan	Smooth
Placement	Flow or trowel application with deaeration
Typical Base	Prepared concrete
Primer	Compatible hybrid primer or scratch layer
Temperature Reference	-15 to +70 °C for 4 mm construction
Process Condition	Predominantly dry
Traffic Duty	Heavy internal industrial use
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Suitable for dry pharmaceutical production, packaging and manufacturing support floors exposed to trolley traffic and occasional chemicals. Choose a textured alternative where water or other contaminants regularly remain on the walking surface. The cleaning method should reflect the substances actually used in the room.

Solutions for Your Application

A smooth floor is required but a thin coating lacks wearing depth.

Use the mineral-rich hybrid body at the selected 4-6 mm thickness.

The purchaser assumes all PU-cement thicknesses tolerate the same heat.

Match the actual thermal exposure with the specified construction depth rather than the resin-family name.

Pilihan yang boleh didapati

Select colour, cove geometry and thickness within the supported range. Plan local falls and drainage before finishing, while keeping this model's smooth surface identity clear.

Planning a Heavy-Duty Polyurethane Cement Flooring 4–6 mm Smooth specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami