Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drainage-aware detailing
Continuous slopes and secure drain terminations reduce low spots where cleaning water can collect; the wearing layer follows the properly formed underlying profile.
STJH-FOOD-GRADE-POLYURETHANE-CEMENT-FLOORING-WD60
Food-Grade Polyurethane-Cement Flooring 6 mm Washdown
A textured polyurethane mortar floor for food processing rooms exposed to frequent washing and drainage.
- 6 mm polyurethane mortar body
- Textured walking surface
- Compatible with drain-directed floor layouts
About This Product
This 6 mm wearing system addresses wet service around filling, cleaning and food preparation equipment. The polyurethane mortar forms a substantial mineral-filled body over a prepared base, while the room's falls direct wash water toward drains. Its selection is driven by sanitation cycles and wet pedestrian routes, not simply by the need to cover concrete with a decorative resin finish.
Características clave
Grip under wet service
The textured surface gives footwear more purchase than a smooth finish. Cleaning tools must reach into the texture to remove fatty or sugary residues.
Mineral-reinforced body
The mortar build provides a durable contact surface around frequently washed equipment bases, where impacts and moisture occur together during production and sanitation.
Parámetros técnicos
| Resin System | Polyurethane mortar |
|---|---|
| Nominal Wearing Thickness | 6 mm |
| Aggregate Phase | Mineral-filled mortar |
| Superficie acabada | Textured, slip-resistant profile |
| Aplicación | Trowel-applied wearing system |
| Substrate Profile | Prepared falls toward drains |
| Drain Interface | Bonded resin termination |
| Service Exposure | Wet processing and repeated washdown |
| Traffic Type | Personnel and food-processing equipment routes |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Applications
Suitable for beverage filling areas, dairy support rooms and meat-processing routes where rinsing water needs a defined exit. Drain positions, equipment feet and doorways determine the floor geometry. Chemical suitability depends on the actual detergent, food acid and contact duration used in the room.
Solutions for Your Application
Water pools after the sanitation team finishes rinsing.
Build consistent falls before installing the wearing layer and maintain unobstructed paths to accessible drains.
The floor edge breaks down beside a drain channel.
Use a properly bonded termination and compatible joint detail at the metal interface, with the mortar fully supported beneath the edge.
Opciones disponibles
Specify the texture, cove height, drain-channel junction and termination at equipment plinths. Where floor falls require substantial depth, provide a separate compatible levelling build-up beneath the 6 mm wearing system.
Planning a Food-Grade Polyurethane-Cement Flooring 6 mm Washdown specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
