STJH 6 mm washdown polyurethane-cement cured flooring sample with textured surface and mineral cut edge on white

STJH-FOOD-GRADE-POLYURETHANE-CEMENT-FLOORING-WD60

Food-Grade Polyurethane-Cement Flooring 6 mm Washdown

A textured polyurethane mortar floor for food processing rooms exposed to frequent washing and drainage.

6 mm polyurethane mortar body
Textured walking surface
Compatible with drain-directed floor layouts

견적 요청 제품 찾아보기

About This Product

This 6 mm wearing system addresses wet service around filling, cleaning and food preparation equipment. The polyurethane mortar forms a substantial mineral-filled body over a prepared base, while the room's falls direct wash water toward drains. Its selection is driven by sanitation cycles and wet pedestrian routes, not simply by the need to cover concrete with a decorative resin finish.

주요 기능

Drainage-aware detailing

Continuous slopes and secure drain terminations reduce low spots where cleaning water can collect; the wearing layer follows the properly formed underlying profile.

Grip under wet service

The textured surface gives footwear more purchase than a smooth finish. Cleaning tools must reach into the texture to remove fatty or sugary residues.

Mineral-reinforced body

The mortar build provides a durable contact surface around frequently washed equipment bases, where impacts and moisture occur together during production and sanitation.

기술 매개변수

Resin System	Polyurethane mortar
Nominal Wearing Thickness	6 mm
Aggregate Phase	Mineral-filled mortar
표면 마무리	Textured, slip-resistant profile
Application	Trowel-applied wearing system
Substrate Profile	Prepared falls toward drains
Drain Interface	Bonded resin termination
Service Exposure	Wet processing and repeated washdown
Traffic Type	Personnel and food-processing equipment routes
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Suitable for beverage filling areas, dairy support rooms and meat-processing routes where rinsing water needs a defined exit. Drain positions, equipment feet and doorways determine the floor geometry. Chemical suitability depends on the actual detergent, food acid and contact duration used in the room.

Solutions for Your Application

Water pools after the sanitation team finishes rinsing.

Build consistent falls before installing the wearing layer and maintain unobstructed paths to accessible drains.

The floor edge breaks down beside a drain channel.

Use a properly bonded termination and compatible joint detail at the metal interface, with the mortar fully supported beneath the edge.

사용 가능한 옵션

Specify the texture, cove height, drain-channel junction and termination at equipment plinths. Where floor falls require substantial depth, provide a separate compatible levelling build-up beneath the 6 mm wearing system.

Planning a Food-Grade Polyurethane-Cement Flooring 6 mm Washdown specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.