STjh 1372 mm Class III cabinet showing three glove ports across a sealed viewing window and a left transfer chamber

STJH-CLASS-III-BIOLOGICAL-SAFETY-CABINET-3G-1372

Class III Biological Safety Cabinet 3-Glove 1372 mm

A three-glove Class III cabinet that adds a central handling position across a 1372 mm sealed work chamber.

Three glove positions
1372 mm internal width
Double exhaust HEPA

Solicite un presupuesto. Browse productos

Introducción del producto

The intermediate chamber adds 305 mm of working width and a third glove position over the compact model. That layout supports a left-to-right sequence for receipt, manipulation and staging without the floor span of the four-glove cabinet.

Características clave

Sequential task layout

Three access positions let operators assign separate zones to preparation, active handling and completed material.

Leak-tight isolation

Sanitary shut-off valves on inlet and exhaust support closure of the filtered chamber.

Ergonomic viewing plane

A sloped clear window improves sightlines across the deeper middle work position.

Parámetros técnicos

Work-Zone Dimensions	1372 x 559 x 743 mm
Overall Dimensions	1836 x 629 x 1940 mm including stand
Glove Ports	3 angled stainless ports
Cabinet Class	Class III biological safety cabinet
Operating Pressure	Negative relative to the room
Supply Filtration	Single HEPA stage
Exhaust Filtration	Double HEPA stages
Viewing Window	9.5 mm coated clear polycarbonate, nominal 5–7° slope
Interior Finish	Polished stainless steel with coved corners
Customization	Transfer device, glove specification, utility penetrations and blower arrangement can be adapted to the operating procedure.

Applications

Multi-step pathogen research, vaccine-development support and virology procedures that benefit from three distinct manipulation positions.

Solutions for Your Application

A two-glove chamber forces instruments to share the primary handling area.Use the third access position to separate equipment operation from sample transfer and finishing tasks.

Interior shutdown must not rely on exposed temporary closures.Select the sanitary inlet and exhaust shut-off arrangement for a defined leak-tight isolation state.

Opciones disponibles

Airlock side and purge, glove type and size, VHP ports, blower location, utilities and mobile base are configurable.

Planning a Class III Biological Safety Cabinet 3-Glove 1372 mm specification?

Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.

Habla con nuestro equipo