STjh 2037 CFM centrifugal roof exhaust fan with an enlarged upper wheel housing and motor section on white.

STJH-CENTRIFUGAL-ROOF-EXHAUST-FAN-2037CFM

Centrifugal Roof Exhaust Fan 2037 CFM

A medium direct-drive upblast fan with variable-speed capacity for laboratory and clean manufacturing exhaust.

581-2037 CFM range
1/2 hp variable-speed motor
19 x 19 in curb cap

Solicite un presupuesto. Browse productos

Introducción del producto

The medium upblast fan provides 581-2037 CFM with a 1/2 hp variable-speed motor while retaining a 19 x 19 in curb cap. Its larger wheel and motor section give nearly twice the maximum airflow of the compact model without increasing the curb footprint. Speed control supports pressure or airflow balancing, but the selected control range must keep the motor and wheel within their approved operating envelope.

Características clave

Medium roof-exhaust capacity

The larger direct-drive assembly supports laboratory and clean manufacturing exhaust branches.

Variable airflow control

Motor speed can be adjusted to maintain the required exhaust or room-pressure setpoint.

Shared compact curb size

Higher airflow is achieved while retaining the same nominal curb cap as the smaller fan.

Parámetros técnicos

Airflow Range	581-2037 CFM
Motor	1/2 hp
Drive	Direct variable speed
Curb Cap	19 x 19 in
Discharge	Centrifugal upblast
Installation	Roof curb mounted
Control	Compatible variable-speed input
Wheel	Larger direct-drive centrifugal wheel
Primary Duty	Medium general exhaust
Customization	Disponible según la aplicación prevista y el entorno operativo.

Applications

For medium clean manufacturing, laboratory and healthcare roof exhaust where variable airflow supports room-pressure control.

Solutions for Your Application

Reducing speed too far allows backflow or loses required negative room pressure.Set a validated minimum speed and use airflow or pressure feedback with alarm limits.

The existing 19 in curb cannot carry the larger fan's weight or wind load.Verify curb structure and anchorage for the selected unit and local roof conditions.

Opciones disponibles

Specify duty point, electrical supply, control signal, curb, damper, disconnect, coating, access, wind rating and monitoring.

Planning a Centrifugal Roof Exhaust Fan 2037 CFM specification?

Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.

Habla con nuestro equipo