Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Sistemas de utilidad de Cleanroom
Bomba centrífuga sanitaria
A close-coupled 316L centrifugal pump for efficient circulation and transfer of clean utility water and low-viscosity hygienic liquids.
- Polished 316L wetted parts
- Low-hold-up hygienic wet end
- Single or flushed double seal options
Introducción del producto
The sanitary centrifugal pump combines a polished stainless volute and impeller with a close-coupled electric motor for compact clean-utility service. The open hygienic wet-end geometry supports effective cleaning, while external seal access simplifies inspection and replacement without disturbing facility piping more than necessary.
Características clave
Single-stage end-suction hydraulic design
Polished hygienic volute and impeller
External single or double mechanical seal
Close-coupled compact footprint
Sanitary clamp or weld-end connections
Optional stainless motor shroud
Drainable installation orientation
Soluciones para su aplicación
Reliable hygienic pumping requires the hydraulic curve, seal arrangement and installation geometry to match both normal operation and cleaning conditions.
The pump operates far from its efficient rangeSelect impeller diameter and motor speed from the actual system curve rather than pipe size alone.
Seal wear causes recurring leakageChoose seal materials and single, flushed or double configuration according to temperature, lubricity and cleaning exposure.
Air pockets interrupt stable circulationProvide flooded suction, adequate NPSH margin and ventable piping for a standard non-self-priming centrifugal pump.
Residue remains in the wet endInstall the pump in its specified drainable orientation and maintain the defined cleaning velocity through the casing.
Aplicaciones típicas
Purified Water circulationWFI distribution supportCIP solution transferPharmaceutical buffer transferBiotechnology and cosmetic process utilities
Parámetros técnicos
Representative construction and envelope values vary by hydraulic size, motor power, seal arrangement and connection standard.
| Materiales Core | 316L stainless steel volute, impeller, shaft and product-contact fittings |
|---|---|
| Panel de espesor | Stainless casing wall typically 3.0–10.0 mm according to pump size |
| Ancho efectivo | Overall pump width typically 220–650 mm |
| Longitud máxima | Close-coupled pump and motor length typically up to 1600 mm |
| Acero frente a espesor | Optional stainless motor shroud typically 1.0–1.5 mm |
| Densidad Core | Densidad de acero inoxidable 316L aproximadamente 8000 kg/m³ |
| Conductividad térmica | Acero inoxidable 316L aproximadamente 15 W/(m · K) a temperatura ambiente |
| Superficie acabada | Polished product-contact surfaces with satin external stainless finish |
| Tipo conjunto | Sanitary clamp, weld-end or selected hygienic union connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or double mechanical sealSeal flush housingVariable-frequency motorStainless motor shroudDifferent impeller trimsClamp or weld-end portsMobile trolley or fixed feetHigh-temperature elastomers
Planning a Sanitary Centrifugal Pump specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
