Sanitary centrifugal pump three-quarter view with hygienic wet end

Sistem Utiliti Bilik Bersih

Pam Centrifugal Kebersihan

A close-coupled 316L centrifugal pump for efficient circulation and transfer of clean utility water and low-viscosity hygienic liquids.

Polished 316L wetted parts
Low-hold-up hygienic wet end
Single or flushed double seal options

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The sanitary centrifugal pump combines a polished stainless volute and impeller with a close-coupled electric motor for compact clean-utility service. The open hygienic wet-end geometry supports effective cleaning, while external seal access simplifies inspection and replacement without disturbing facility piping more than necessary.

Ciri-ciri Utama

316L stainless steel wetted components

Single-stage end-suction hydraulic design

Polished hygienic volute and impeller

External single or double mechanical seal

Close-coupled compact footprint

Sanitary clamp or weld-end connections

Optional stainless motor shroud

Drainable installation orientation

Penyelesaian untuk permohonan anda

Reliable hygienic pumping requires the hydraulic curve, seal arrangement and installation geometry to match both normal operation and cleaning conditions.

The pump operates far from its efficient rangeSelect impeller diameter and motor speed from the actual system curve rather than pipe size alone.

Seal wear causes recurring leakageChoose seal materials and single, flushed or double configuration according to temperature, lubricity and cleaning exposure.

Air pockets interrupt stable circulationProvide flooded suction, adequate NPSH margin and ventable piping for a standard non-self-priming centrifugal pump.

Residue remains in the wet endInstall the pump in its specified drainable orientation and maintain the defined cleaning velocity through the casing.

Permohonan yang biasa

Purified Water circulationWFI distribution supportCIP solution transferPharmaceutical buffer transferBiotechnology and cosmetic process utilities

Parameter teknikal

Representative construction and envelope values vary by hydraulic size, motor power, seal arrangement and connection standard.

Bahan Teras	316L stainless steel volute, impeller, shaft and product-contact fittings
Ketebalan Panel	Stainless casing wall typically 3.0–10.0 mm according to pump size
Lebar berkesan	Overall pump width typically 220–650 mm
Panjang maksimum	Close-coupled pump and motor length typically up to 1600 mm
Keluli Menghadapi Ketebalan	Optional stainless motor shroud typically 1.0–1.5 mm
Ketumpatan teras	Ketumpatan keluli tahan karat 316L kira-kira 8000 kg/m³
Kekonduksian Terma	Keluli tahan karat 316L kira-kira 15 W/(m · K) pada suhu ambien
Kemasan permukaan	Polished product-contact surfaces with satin external stainless finish
Jenis Bersatu	Sanitary clamp, weld-end or selected hygienic union connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single or double mechanical sealSeal flush housingVariable-frequency motorStainless motor shroudDifferent impeller trimsClamp or weld-end portsMobile trolley or fixed feetHigh-temperature elastomers

Planning a Sanitary Centrifugal Pump specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami