Englisch
Portugiesisch
Spanisch
Malaiisch
indonesisch
DeutschCurrent
Türkischer Sprache
Vietnamesisch
Französisch
Russisch
Arabisch
Thailändisch
Japanisch
Koreanisch
Cleanroom Utility Systemen
Sanitärzentrifugalpumpe
A close-coupled 316L centrifugal pump for efficient circulation and transfer of clean utility water and low-viscosity hygienic liquids.
- Polished 316L wetted parts
- Low-hold-up hygienic wet end
- Single or flushed double seal options
Produkteinführung
The sanitary centrifugal pump combines a polished stainless volute and impeller with a close-coupled electric motor for compact clean-utility service. The open hygienic wet-end geometry supports effective cleaning, while external seal access simplifies inspection and replacement without disturbing facility piping more than necessary.
Key Features
Single-stage end-suction hydraulic design
Polished hygienic volute and impeller
External single or double mechanical seal
Close-coupled compact footprint
Sanitary clamp or weld-end connections
Optional stainless motor shroud
Drainable installation orientation
Lösungen für Ihre Anwendung
Reliable hygienic pumping requires the hydraulic curve, seal arrangement and installation geometry to match both normal operation and cleaning conditions.
The pump operates far from its efficient rangeSelect impeller diameter and motor speed from the actual system curve rather than pipe size alone.
Seal wear causes recurring leakageChoose seal materials and single, flushed or double configuration according to temperature, lubricity and cleaning exposure.
Air pockets interrupt stable circulationProvide flooded suction, adequate NPSH margin and ventable piping for a standard non-self-priming centrifugal pump.
Residue remains in the wet endInstall the pump in its specified drainable orientation and maintain the defined cleaning velocity through the casing.
Typische Anwendungen
Purified Water circulationWFI distribution supportCIP solution transferPharmaceutical buffer transferBiotechnology and cosmetic process utilities
Technische Parameter
Representative construction and envelope values vary by hydraulic size, motor power, seal arrangement and connection standard.
| Core Material | 316L stainless steel volute, impeller, shaft and product-contact fittings |
|---|---|
| Panel Dicke | Stainless casing wall typically 3.0–10.0 mm according to pump size |
| Effektive Breite | Overall pump width typically 220–650 mm |
| Maximale Länge | Close-coupled pump and motor length typically up to 1600 mm |
| Stahl facing Dicke | Optional stainless motor shroud typically 1.0–1.5 mm |
| Kerndichte | 316L Edelstahl dichte ca. 8000 kg/m³ |
| Thermische Leitfähigkeit | Edelstahl 316L ca. 15 W/(m · K) bei Umgebungs temperatur |
| Oberfläche Finish | Polished product-contact surfaces with satin external stainless finish |
| Gemeinsamer Typ | Sanitary clamp, weld-end or selected hygienic union connections |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Single or double mechanical sealSeal flush housingVariable-frequency motorStainless motor shroudDifferent impeller trimsClamp or weld-end portsMobile trolley or fixed feetHigh-temperature elastomers
Planning a Sanitary Centrifugal Pump specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
