Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Equipos de HVAC y manejo de aire para salas limpias
Recuperación de calor Unidad de manejo de aire
A dual-air-stream unit that transfers useful heat between exhaust and outdoor air while keeping filtration and airflow control independently serviceable.
- Separated Supply and Exhaust
- Selectable Recovery Technology
- Bypass and Frost Control
- Reduced Outdoor-Air Load
Introducción del producto
The heat recovery air handling unit brings outdoor supply and building exhaust through a common insulated casing while maintaining defined separation between air streams. Counterflow plate exchangers offer no moving transfer surface, rotary wheels provide high sensible and latent recovery where appropriate, and run-around coils completely separate the ducts. Bypass dampers, frost control and independent fans keep airflow stable through changing outdoor conditions. The recovery method is chosen according to contamination-transfer tolerance, humidity objectives and physical duct arrangement.
Características clave
Independent supply and exhaust fans maintain balanced airflow through different filter-loading conditions.
Bypass and frost-control sequences protect the exchanger during extreme ambient operation.
Accessible recovery cassettes and drain sections simplify inspection and cleaning.
Soluciones para su aplicación
Energy recovery is valuable only when cross-stream leakage, frost, condensate and fan balance are controlled for the actual exhaust source.
Exhaust contaminants can cross into the clean supply air through the wrong recovery device.A plate or run-around system is selected where physical stream separation is the priority.
Ice blocks the exchanger during cold outdoor operation.Temperature-based bypass, preheat or controlled defrost limits frost accumulation.
Unequal supply and exhaust pressure drives leakage across a rotary wheel.Fan control and purge-section arrangement establish the intended pressure relationship.
Condensate remains under a plate exchanger and reaches adjacent panels.A full-width sloped drain pan collects water from the complete recovery section.
Aplicaciones típicas
Cleanroom ventilation systemsLaboratories with high exhaustHealthcare clean facilitiesPharmaceutical productionEnergy-conscious industrial ventilation
Parámetros técnicos
Representative casing data for a dual-stream heat-recovery air handling unit are shown below.
| Materiales Core | Closed-cell polyurethane or mineral-wool insulation in separated double-skin air paths |
|---|---|
| Panel de espesor | 50–60 mm insulated casing |
| Ancho efectivo | 1000–3200 mm nominal unit width |
| Longitud máxima | Up to 10000 mm including recovery, filter, coil and fan sections |
| Acero frente a espesor | 0.6–1.0 mm galvanized, coated or stainless sheet skins |
| Densidad Core | 40–44 kg/m³ polyurethane or 86–100 kg/m³ mineral wool |
| Conductividad térmica | 0.022–0.040 W/(m·K) for the casing insulation |
| Superficie acabada | Powder-coated exterior with cleanable galvanized or stainless inner lining |
| Tipo conjunto | Gasketed dual-stream casing with sealed recovery cassette and independent duct collars |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Counterflow plate heat exchangerRotary sensible or enthalpy wheelRun-around coil recovery loopBypass damper, preheat and frost-control package
Planning a Heat Recovery Air Handling Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
