Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Equipos de flujo laminar y contención
Booth de contención de polvo
Una cabina completamente cerrada de presión negativa que separa el trabajo manual con polvo de la sala circundante mediante accesos con juntas, flujo de aire monitorizado y filtración por etapas.
- Fully Enclosed Process Zone
- Gasketed Access Doors
- Presión negativa monitoreada
- Contained Filter Change Options
Introducción del producto
This booth adds full walls and gasketed doors around a powder-handling process that requires greater separation than an open downflow enclosure. Filtered supply and extracted return air maintain the selected negative pressure while operators work inside the stainless-lined room. Personnel and material access can be separated, and view panels allow observation from outside. The booth configuration, decontamination method and filter-change arrangement are chosen for the actual powder and operating procedure.
Características clave
Separated personnel and material openings can reduce crossing traffic.
External view panels permit supervision without opening the booth.
Staged filters retain airborne powder before air is recirculated or exhausted.
Contained change collars can isolate loaded filters during maintenance.
Soluciones para su aplicación
A closed powder room must keep its pressure boundary intact through door cycles, service work and movement of materials.
Open-front containment is insufficient for the handling procedure.Gasketed walls and doors create a complete process-room boundary.
Material entry repeatedly disturbs the personnel route.A dedicated material door or pass-through separates load movement from operator access.
Pressure is lost when a door does not close fully.Door-position monitoring and visible room pressure indication warn of an incomplete boundary.
Filter service opens the contaminated side to the facility.Contained change bags or remote technical-side access isolate the service operation.
Aplicaciones típicas
Potent powder manipulationSensitizing ingredient subdivisionContained dry process supportHazardous sample preparation
Parámetros técnicos
Typical configurable construction ranges for an enclosed powder containment booth are listed below.
| Materiales Core | High-density mineral-wool cleanroom panels with SUS316L internal liners and staged containment filter housings |
|---|---|
| Panel de espesor | 75-120 mm pressure-resistant enclosure panels |
| Ancho efectivo | 2000-5000 mm clear process-room width |
| Longitud máxima | Up to 10000 mm enclosed booth length |
| Acero frente a espesor | 1.2-1.5 mm SUS316L inner facing; 1.0-1.2 mm outer steel |
| Densidad Core | 100-150 kg/m³ high-density mineral-wool core |
| Conductividad térmica | 0.035-0.045 W/(m·K) para el núcleo de lana mineral |
| Superficie acabada | Fine-brushed or electropolished SUS316L interior with sealed external powder coating |
| Tipo conjunto | Pressure-sealed flush panel joints with gasketed monitored doors and welded return ducts |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Personal y material de las esclusas de aireBag-in/bag-out filter housingsIntegrated wash-down utilitiesOnce-through or recirculating airflow
Planning a Enclosed Powder Containment Booth specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
