Aseptic filling isolator integrated around a vial filling line

Equipos de flujo laminar y contención

Aislador de llenado aséptico

A custom barrier enclosure integrated around filling, stoppering and closure equipment to protect open sterile containers throughout the critical process.

Filling-Line Integration
Critical-Zone Unidirectional Air
Glove-Assisted Intervention
Closed Component Transfer

Solicite un presupuesto. Browse productos

Introducción del producto

The aseptic filling isolator is designed around the exact fill-finish equipment rather than supplied as an empty cabinet. Chamber sections enclose container infeed, filling, stoppering and critical closure steps, with HEPA-filtered unidirectional air directed over open containers. Glove ports permit planned interventions, while rapid transfer ports, transfer hatches or sterile connectors introduce components. Removable or lift-up lower sections preserve access to the filling machine for controlled maintenance.

Características clave

The chamber geometry follows the filling line and open-container path.

Dedicated diffuser zones maintain first air above critical filling and stoppering points.

Glove ports are positioned for defined interventions rather than general access.

Closed transfer interfaces introduce stoppers, tools and components.

Technical-side panels allow machine service without dismantling the complete barrier.

Soluciones para su aplicación

The isolator must fit the filling machine while preserving first air, intervention reach and maintenance access along the complete container path.

Machine frames block clean air above open containers.Diffuser modules are divided around the actual fill and stopper positions.

Glove ports do not reach jam-clearance points.Intervention mapping sets glove locations before chamber fabrication.

Components enter through an open door during production.Rapid ports and sterile transfer interfaces feed closures and tools through closed paths.

Maintenance requires complete barrier removal.Sectioned technical panels and lift-up lower skirts expose the machine in a controlled shutdown.

Aplicaciones típicas

Vial filling and stopperingPrefilled syringe fillingCartridge fillingSmall-batch sterile fill-finish

Parámetros técnicos

Typical configurable construction ranges for an aseptic filling isolator are listed below.

Materiales Core	Welded SUS316L barrier chamber with laminated safety glass and CSM glove assemblies around filling equipment
Panel de espesor	50-120 mm chamber, plenum and service sections
Ancho efectivo	1800-6000 mm protected line width
Longitud máxima	Up to 20000 mm integrated filling-line length
Acero frente a espesor	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm removable service skins
Densidad Core	Aproximadamente 8000 kg/m³ para el material de la Cámara SUS316L
Conductividad térmica	14-16 W/(m · K) para acero inoxidable austenítico
Superficie acabada	Electropolished SUS316L interior with flush glazed panels and radiused transitions
Tipo conjunto	Welded modular barrier sections with sealed machine interfaces, glove rings and rapid transfer ports
Customization	Disponible según la aplicación prevista y el entorno operativo.

Opciones disponibles

Vial, syringe or cartridge line integrationBio-descontaminación integrada de vaporRapid transfer and component portsGlove integrity and environmental monitoring connections

Planning a Aseptic Filling Isolator specification?

Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.

Habla con nuestro equipo