Aseptic filling isolator integrated around a vial filling line

Fluxo laminar e equipamentos de contenção

Isolador de enchimento asséptico

A custom barrier enclosure integrated around filling, stoppering and closure equipment to protect open sterile containers throughout the critical process.

Filling-Line Integration
Critical-Zone Unidirectional Air
Glove-Assisted Intervention
Closed Component Transfer

Solicite um orçamento. Browse produtos

Introdução do produto

The aseptic filling isolator is designed around the exact fill-finish equipment rather than supplied as an empty cabinet. Chamber sections enclose container infeed, filling, stoppering and critical closure steps, with HEPA-filtered unidirectional air directed over open containers. Glove ports permit planned interventions, while rapid transfer ports, transfer hatches or sterile connectors introduce components. Removable or lift-up lower sections preserve access to the filling machine for controlled maintenance.

Características-chave

The chamber geometry follows the filling line and open-container path.

Dedicated diffuser zones maintain first air above critical filling and stoppering points.

Glove ports are positioned for defined interventions rather than general access.

Closed transfer interfaces introduce stoppers, tools and components.

Technical-side panels allow machine service without dismantling the complete barrier.

Soluções para sua aplicação

The isolator must fit the filling machine while preserving first air, intervention reach and maintenance access along the complete container path.

Machine frames block clean air above open containers.Diffuser modules are divided around the actual fill and stopper positions.

Glove ports do not reach jam-clearance points.Intervention mapping sets glove locations before chamber fabrication.

Components enter through an open door during production.Rapid ports and sterile transfer interfaces feed closures and tools through closed paths.

Maintenance requires complete barrier removal.Sectioned technical panels and lift-up lower skirts expose the machine in a controlled shutdown.

Aplicações típicas

Vial filling and stopperingPrefilled syringe fillingCartridge fillingSmall-batch sterile fill-finish

Parâmetros técnicos

Typical configurable construction ranges for an aseptic filling isolator are listed below.

Material principal	Welded SUS316L barrier chamber with laminated safety glass and CSM glove assemblies around filling equipment
Painel de espessura	50-120 mm chamber, plenum and service sections
Largura efetiva	1800-6000 mm protected line width
Comprimento máximo	Up to 20000 mm integrated filling-line length
Aço enfrentando espessura	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm removable service skins
Densidade Core	Aproximadamente 8000 kg/m³ para material de câmara SUS316L
Condutividade térmica	14-16 W/(m · K) para aço inoxidável austenítico
Superfície acabado	Electropolished SUS316L interior with flush glazed panels and radiused transitions
Tipo conjunto	Welded modular barrier sections with sealed machine interfaces, glove rings and rapid transfer ports
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Vial, syringe or cartridge line integrationBio-descontaminação de vapor integradoRapid transfer and component portsGlove integrity and environmental monitoring connections

Planning a Aseptic Filling Isolator specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe