Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Separated body and texture
The screed carries the floor build while the broadcast layer establishes the surface profile, making each material's role clear.
STJH-HEAVY-DUTY-EPOXY-MORTAR-FLOORING-SR46
Heavy-Duty Epoxy Mortar Flooring Slip-Resistant Sealed
A heavy epoxy screed with a distinct broadcast-and-seal surface for industrial routes needing both load support and traction.
- Compacted 4-6 mm epoxy screed
- 0.5 mm aluminum-oxide broadcast
- Two high-build epoxy finishing coats
About This Product
SR46 begins with a trowelled epoxy mortar body, then adds a high-build coat, aluminum-oxide broadcast and final epoxy seal. This sequence creates a textured wearing face above the compacted screed, rather than relying only on the mortar's own trowel marks. The nominal 4-6 mm system combines a substantial base with a defined surface treatment for heavily used internal traffic zones.
Características-chave
Sealed traction grains
The final coat binds the exposed aggregate into the finish, reducing loose particles while retaining a useful contact texture.
Continuous cove connection
Compatible mortar coving can extend the floor up the wall, avoiding a sharp dirt-catching corner in industrial cleaning zones.
Parâmetros técnicos
| Main Body | Epoxy mortar screed |
|---|---|
| System Thickness | 4-6 mm |
| Broadcast Material | Aluminum oxide |
| Broadcast Grain Size | 0.5 mm |
| Finish-Coat Count | Two high-build epoxy coats |
| Surface Appearance | Textured gloss |
| Screed Placement | Trowel |
| Seal Application | Squeegee and roller |
| Traffic Type | Heavy rolling and point loads |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Applications
Appropriate for pharmaceutical logistics, industrial workshops and heavily used material-handling areas where a smooth mortar seal is insufficient. The selected texture should also work with the site's cleaning equipment, since overly coarse profiles can retain residues when maintenance tools cannot reach between grains.
Solutions for Your Application
A heavy-duty floor is required but a smooth seal offers insufficient grip.
Use the specified broadcast finishing sequence over the mortar instead of changing the mortar body alone.
Surface aggregate may become loose under traffic.
Remove unbound excess and apply the compatible final seal at the required coverage.
Opções disponíveis
Choose colour, cove detail and junction layout for the actual traffic route. Retain the aluminum-oxide broadcast architecture when ordering this model; a plain sealed screed is a different construction.
Planning a Heavy-Duty Epoxy Mortar Flooring Slip-Resistant Sealed specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
