STJH SR46 epoxy mortar flooring sample showing a sealed granular face and layered cut edge on white

STJH-HEAVY-DUTY-EPOXY-MORTAR-FLOORING-SR46

Heavy-Duty Epoxy Mortar Flooring Slip-Resistant Sealed

A heavy epoxy screed with a distinct broadcast-and-seal surface for industrial routes needing both load support and traction.

Compacted 4-6 mm epoxy screed
0.5 mm aluminum-oxide broadcast
Two high-build epoxy finishing coats

Permintaan sebut harga Semak imbas produk

About This Product

SR46 begins with a trowelled epoxy mortar body, then adds a high-build coat, aluminum-oxide broadcast and final epoxy seal. This sequence creates a textured wearing face above the compacted screed, rather than relying only on the mortar's own trowel marks. The nominal 4-6 mm system combines a substantial base with a defined surface treatment for heavily used internal traffic zones.

Ciri-ciri Utama

Separated body and texture

The screed carries the floor build while the broadcast layer establishes the surface profile, making each material's role clear.

Sealed traction grains

The final coat binds the exposed aggregate into the finish, reducing loose particles while retaining a useful contact texture.

Continuous cove connection

Compatible mortar coving can extend the floor up the wall, avoiding a sharp dirt-catching corner in industrial cleaning zones.

Parameter teknikal

Main Body	Epoxy mortar screed
System Thickness	4-6 mm
Broadcast Material	Aluminum oxide
Broadcast Grain Size	0.5 mm
Finish-Coat Count	Two high-build epoxy coats
Surface Appearance	Textured gloss
Screed Placement	Trowel
Seal Application	Squeegee and roller
Traffic Type	Heavy rolling and point loads
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Appropriate for pharmaceutical logistics, industrial workshops and heavily used material-handling areas where a smooth mortar seal is insufficient. The selected texture should also work with the site's cleaning equipment, since overly coarse profiles can retain residues when maintenance tools cannot reach between grains.

Solutions for Your Application

A heavy-duty floor is required but a smooth seal offers insufficient grip.

Use the specified broadcast finishing sequence over the mortar instead of changing the mortar body alone.

Surface aggregate may become loose under traffic.

Remove unbound excess and apply the compatible final seal at the required coverage.

Pilihan yang boleh didapati

Choose colour, cove detail and junction layout for the actual traffic route. Retain the aluminum-oxide broadcast architecture when ordering this model; a plain sealed screed is a different construction.

Planning a Heavy-Duty Epoxy Mortar Flooring Slip-Resistant Sealed specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami