STJH-EPS-INSULATED-CLEANROOM-PANEL-100-SS

EPS Insulated Cleanroom Panel 100 mm Stainless-Faced

Stainless-faced EPS partition combining a deep section with light infill.

Unpainted room surfaces use stainless sheet.
Bead-foam center limits solid material content.

Request a Quote Browse Products

Product Introduction

The expanded bead core separates two cleanable stainless skins. Perimeter joints retain the foam at the module edge, providing a metal-surfaced partition without replacing the core with dense mineral insulation.

Key Features

Unpainted room surfaces use stainless sheet.
Bead-foam center limits solid material content.

Technical Parameters

Core Material	EPS bead foam
Panel Thickness	100 mm
Effective Width	980 or 1180 mm
Maximum Length	6000 mm
Core Density	15–25 kg/m³
Facing Material	Stainless steel
Core Structure	Expanded cellular foam
Surface Finish	Natural stainless steel
Joint Type	Modular panel edge connection
Customization	Available for the application and operating conditions.

Applications

Dry food packaging walls
Stainless clean support-room partitions

Solutions for Your Application

A stainless wall finish is required but heavy mineral infill is unnecessary.

Stainless skins can be paired with an EPS center.

Deep wall components are harder to maneuver.

The low-density internal structure limits the contribution from the core.

Available Options

Panel length selection
Stainless finish choice

Planning a EPS Insulated Cleanroom Panel 100 mm Stainless-Faced specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team