STJH-EPS-INSULATED-CLEANROOM-PANEL-100-SS

EPS Insulated Cleanroom Panel 100 mm Stainless-Faced

Stainless-faced EPS partition combining a deep section with light infill.

Unpainted room surfaces use stainless sheet.
Bead-foam center limits solid material content.

Введение продукции

The expanded bead core separates two cleanable stainless skins. Perimeter joints retain the foam at the module edge, providing a metal-surfaced partition without replacing the core with dense mineral insulation.

Основные характеристики

Unpainted room surfaces use stainless sheet.
Bead-foam center limits solid material content.

Технические параметры

Основной материал	EPS bead foam
Толщина панели	100 mm
эффективная ширина	980 or 1180 mm
Максимальная длина	6000 mm
Плотность ядра	15–25 kg/m³
Facing Material	Stainless steel
Core Structure	Expanded cellular foam
Поверхностная отделка	Natural stainless steel
Объединенный тип	Modular panel edge connection
Customization	Available for the application and operating conditions.

Applications

Dry food packaging walls
Stainless clean support-room partitions

Solutions for Your Application

A stainless wall finish is required but heavy mineral infill is unnecessary.

Stainless skins can be paired with an EPS center.

Deep wall components are harder to maneuver.

The low-density internal structure limits the contribution from the core.

Доступные варианты

Panel length selection
Stainless finish choice

Planning a EPS Insulated Cleanroom Panel 100 mm Stainless-Faced specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой