Waiting for another door resembles a system fault.
Separate busy and alarm contacts provide distinct indications.
A dedicated microcontroller supervises two monitored doors and their request inputs. The board uses separate relay contacts for door release, busy indication and alarm signalling, and can be installed in a tamper-switched steel enclosure. Configuration jumpers determine the idle behaviour. The assembled two-door system suits a local airlock where operation should remain independent of Ethernet, while still giving the installer clear connection points for locks and auxiliary indications.
| Configured Doors | 2 |
|---|---|
| Controller Type | Microcontroller board |
| Nominal Supply | 12 VDC |
| Idle Selection | Normally locked or normally free |
| Door Release Contact | Single-pole changeover |
| Contact Voltage | 30 V maximum |
| Contact Current | 1 A maximum |
| Delay Options | 5 or 10 seconds |
| Enclosure Option | Tamper-switched mild steel |
| 사용자 정의 | The enclosure and connected door devices can suit the local access arrangement. |
Separate busy and alarm contacts provide distinct indications.
Select the steel enclosure with a tamper switch.
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.