Slim cleanroom RFID card reader with blue credential and mounting plate

클린룸 도어, 창문 및 인터락 시스템

슬림 클린룸 액세스 제어 카드 리더기

A narrow contactless credential reader designed to fit cleanroom door mullions and send verified card data to the access controller.

Slim Mullion Format
Contactless RFID Reading
Blue-Green Status Bar
Sealed Rear Housing

견적 요청 제품 찾아보기

상품 소개

The slim cleanroom card reader packages an RFID antenna, reader electronics and status indicator inside a narrow polymer enclosure suited to aluminum door frames. Presenting a compatible card or key credential generates a coded output to the access controller, which then decides whether to release the electric lock. A perimeter gasket, tamper input and concealed cable entry protect the wall interface while the contrasting status bar confirms credential activity.

주요 기능

The narrow body fits mullions where a standard square reader would overlap the door reveal.

Contactless credential reading avoids exposed slots and moving card mechanisms.

A visible blue-green status light confirms standby, reading and access response states.

The rear gasket and tamper contact help protect the wiring interface from unauthorized removal.

응용 프로그램 솔루션

A cleanroom access reader must fit a narrow metal frame, remain easy to wipe and communicate clearly with the central controller.

A wide wall reader projects beyond the cleanroom door mullion.The slim enclosure stays within the narrow vertical frame face.

Card slots collect dust and wear under frequent use.The RFID credential is read through the sealed front without insertion.

Users repeatedly present a card because they cannot see whether it was detected.The status light changes as the reader processes the credential and controller response.

일반적인 응용 프로그램

Cleanroom personnel entrancesLaboratory restricted doorsHospital controlled-area accessPharmaceutical airlock entry

기술 매개변수

Representative enclosure and material data for a narrow cleanroom RFID reader are shown below.

핵심 재료	Copper RFID antenna and reader electronics on an FR-4 printed circuit board
패널 두께	Approximately 18–25 mm reader-body depth
유효 폭	Approximately 40–48 mm mullion-reader width
최대 길이	Approximately 125–145 mm overall reader length
강철 면면 두께	0.8–1.2 mm stainless-steel mounting plate where selected
코어 밀도	FR-4 전자 라미네이트의 경우 약 1850 kg/m³
열전도도 (Thermal Conductivity)	Approximately 0.25–0.35 W/(m·K) for the FR-4 reader board
표면 마무리	Matte black UV-stable polymer housing with blue-green status illumination
접합 유형	Two-point mullion mounting with concealed cable entry gasket and removable terminal
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Common low- and high-frequency credential formatsWiegand or OSDP controller interfaceBlack or white enclosureCard and key-fob credential sets

Planning a Slim Cleanroom Access Control Card Reader specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.