Slim cleanroom RFID card reader with blue credential and mounting plate

Двери в чистых помещениях, окна и системы блокировки

Считыватель карт контроля доступа в чистых помещениях Slim

A narrow contactless credential reader designed to fit cleanroom door mullions and send verified card data to the access controller.

Slim Mullion Format
Contactless RFID Reading
Blue-Green Status Bar
Sealed Rear Housing

Запрос котировки Просмотреть продукты

Введение продукции

The slim cleanroom card reader packages an RFID antenna, reader electronics and status indicator inside a narrow polymer enclosure suited to aluminum door frames. Presenting a compatible card or key credential generates a coded output to the access controller, which then decides whether to release the electric lock. A perimeter gasket, tamper input and concealed cable entry protect the wall interface while the contrasting status bar confirms credential activity.

Основные характеристики

The narrow body fits mullions where a standard square reader would overlap the door reveal.

Contactless credential reading avoids exposed slots and moving card mechanisms.

A visible blue-green status light confirms standby, reading and access response states.

The rear gasket and tamper contact help protect the wiring interface from unauthorized removal.

Решения для вашего приложения

A cleanroom access reader must fit a narrow metal frame, remain easy to wipe and communicate clearly with the central controller.

A wide wall reader projects beyond the cleanroom door mullion.The slim enclosure stays within the narrow vertical frame face.

Card slots collect dust and wear under frequent use.The RFID credential is read through the sealed front without insertion.

Users repeatedly present a card because they cannot see whether it was detected.The status light changes as the reader processes the credential and controller response.

Типичные приложения

Cleanroom personnel entrancesLaboratory restricted doorsHospital controlled-area accessPharmaceutical airlock entry

Технические параметры

Representative enclosure and material data for a narrow cleanroom RFID reader are shown below.

Основной материал	Copper RFID antenna and reader electronics on an FR-4 printed circuit board
Толщина панели	Approximately 18–25 mm reader-body depth
эффективная ширина	Approximately 40–48 mm mullion-reader width
Максимальная длина	Approximately 125–145 mm overall reader length
Толщина линий стали	0.8–1.2 mm stainless-steel mounting plate where selected
Плотность ядра	Приблизительно 1850 кг/м³ для электронного ламината FR-4
Теплопроводимость	Approximately 0.25–0.35 W/(m·K) for the FR-4 reader board
Поверхностная отделка	Matte black UV-stable polymer housing with blue-green status illumination
Объединенный тип	Two-point mullion mounting with concealed cable entry gasket and removable terminal
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Common low- and high-frequency credential formatsWiegand or OSDP controller interfaceBlack or white enclosureCard and key-fob credential sets

Planning a Slim Cleanroom Access Control Card Reader specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой