Slim cleanroom RFID card reader with blue credential and mounting plate

Pintu Bilik Bersih, Windows dan Sistem Interlock

Pembaca Kad Kawalan Akses Bilik Bersih Slim

A narrow contactless credential reader designed to fit cleanroom door mullions and send verified card data to the access controller.

Slim Mullion Format
Contactless RFID Reading
Blue-Green Status Bar
Sealed Rear Housing

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The slim cleanroom card reader packages an RFID antenna, reader electronics and status indicator inside a narrow polymer enclosure suited to aluminum door frames. Presenting a compatible card or key credential generates a coded output to the access controller, which then decides whether to release the electric lock. A perimeter gasket, tamper input and concealed cable entry protect the wall interface while the contrasting status bar confirms credential activity.

Ciri-ciri Utama

The narrow body fits mullions where a standard square reader would overlap the door reveal.

Contactless credential reading avoids exposed slots and moving card mechanisms.

A visible blue-green status light confirms standby, reading and access response states.

The rear gasket and tamper contact help protect the wiring interface from unauthorized removal.

Penyelesaian untuk permohonan anda

A cleanroom access reader must fit a narrow metal frame, remain easy to wipe and communicate clearly with the central controller.

A wide wall reader projects beyond the cleanroom door mullion.The slim enclosure stays within the narrow vertical frame face.

Card slots collect dust and wear under frequent use.The RFID credential is read through the sealed front without insertion.

Users repeatedly present a card because they cannot see whether it was detected.The status light changes as the reader processes the credential and controller response.

Permohonan yang biasa

Cleanroom personnel entrancesLaboratory restricted doorsHospital controlled-area accessPharmaceutical airlock entry

Parameter teknikal

Representative enclosure and material data for a narrow cleanroom RFID reader are shown below.

Bahan Teras	Copper RFID antenna and reader electronics on an FR-4 printed circuit board
Ketebalan Panel	Approximately 18–25 mm reader-body depth
Lebar berkesan	Approximately 40–48 mm mullion-reader width
Panjang maksimum	Approximately 125–145 mm overall reader length
Keluli Menghadapi Ketebalan	0.8–1.2 mm stainless-steel mounting plate where selected
Ketumpatan teras	Approximately 1850 kg/m³ for the FR-4 electronic laminate
Kekonduksian Terma	Approximately 0.25–0.35 W/(m·K) for the FR-4 reader board
Kemasan permukaan	Matte black UV-stable polymer housing with blue-green status illumination
Jenis Bersatu	Two-point mullion mounting with concealed cable entry gasket and removable terminal
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Common low- and high-frequency credential formatsWiegand or OSDP controller interfaceBlack or white enclosureCard and key-fob credential sets

Planning a Slim Cleanroom Access Control Card Reader specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami