Sanitary pipe fittings complete six-piece set with elbow tee reducer ferrule cap and clamp union

클린룸 유틸리티 시스템

위생 파이프 피팅 Sanitary Pipe Fittings

A coordinated range of polished 316L weld-end and clamp-end elbows, tees, reducers, ferrules and closures for hygienic piping assemblies.

Matched hygienic dimensions
Weld and clamp connection choices
Polished 316L construction

견적 요청 제품 찾아보기

상품 소개

Sanitary Pipe Fittings change direction, create branches, transition tube sizes and provide removable service connections without compromising the hygienic flow path. Controlled outside diameters, tangent lengths and surface grades support alignment with matching sanitary tube, while weld-end and clamp-end formats allow permanent spools and accessible breakpoints to be planned separately.

주요 기능

316L stainless fitting bodies

Elbows, tees, reducers and crosses

Concentric and eccentric transitions

Square weld-end preparation

Hygienic clamp ferrules and caps

Mechanical-polish and electropolish choices

Matched dimensional series

Compatible hygienic gasket options

응용 프로그램 솔루션

Fittings must preserve smooth internal transitions and fit-up accuracy while providing the direction, branching and service access required by the installed route.

Mixed fitting standards create step changes at jointsSelect one compatible tube dimension series and match every weld end and ferrule to it.

Reducers retain liquid in drainable linesChoose concentric or eccentric geometry according to installed orientation and drainage direction.

Clamp joints are overused in inaccessible locationsReserve removable unions for service breakpoints and use welded fittings elsewhere.

Seal materials deteriorate in cleaning cyclesMatch gasket polymer to temperature, chemistry and SIP exposure before finalizing the union.

일반적인 응용 프로그램

Pharmaceutical water pipingClean-steam distributionCIP and SIP manifoldsBioprocess transfer linesHygienic food and cosmetic piping

기술 매개변수

Fitting type, nominal size, wall, tangent dimensions, finish, connection ends and seal material are selected to match the adjoining hygienic tube system.

핵심 재료	316L stainless steel sanitary elbows, tees, reducers, ferrules and caps
패널 두께	Fitting wall typically 0.89–2.77 mm
유효 폭	Matching tube outside diameter typically 6.35–152.4 mm
최대 길이	Individual fitting length typically up to 600 mm
강철 면면 두께	Clamp band typically 1.5–3.0 mm
코어 밀도	316L 스테인리스 밀도 대략 8000 kg/m³
열전도도 (Thermal Conductivity)	316L 스테인리스 주위 온도에서 대략 15 W/(m · K)
표면 마무리	Mechanically polished or electropolished wetted surface with clean satin exterior
접합 유형	Orbital-weld ends, hygienic clamp ferrules or configured mixed weld-and-clamp ends
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Elbows from 45 to 180 degreesEqual or reducing teesConcentric or eccentric reducersWeld-end or clamp-end configurationsMechanical-polish or electropolish gradeEPDM, FKM or PTFE-based sealsASME BPE, ISO, DIN or metric dimensions

Planning a Sanitary Pipe Fittings specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.