English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Утилитарные системы для чистых помещений
Фитинги для санитарных труб
A coordinated range of polished 316L weld-end and clamp-end elbows, tees, reducers, ferrules and closures for hygienic piping assemblies.
- Matched hygienic dimensions
- Weld and clamp connection choices
- Polished 316L construction
Введение продукции
Sanitary Pipe Fittings change direction, create branches, transition tube sizes and provide removable service connections without compromising the hygienic flow path. Controlled outside diameters, tangent lengths and surface grades support alignment with matching sanitary tube, while weld-end and clamp-end formats allow permanent spools and accessible breakpoints to be planned separately.
Основные характеристики
Elbows, tees, reducers and crosses
Concentric and eccentric transitions
Square weld-end preparation
Hygienic clamp ferrules and caps
Mechanical-polish and electropolish choices
Matched dimensional series
Compatible hygienic gasket options
Решения для вашего приложения
Fittings must preserve smooth internal transitions and fit-up accuracy while providing the direction, branching and service access required by the installed route.
Mixed fitting standards create step changes at jointsSelect one compatible tube dimension series and match every weld end and ferrule to it.
Reducers retain liquid in drainable linesChoose concentric or eccentric geometry according to installed orientation and drainage direction.
Clamp joints are overused in inaccessible locationsReserve removable unions for service breakpoints and use welded fittings elsewhere.
Seal materials deteriorate in cleaning cyclesMatch gasket polymer to temperature, chemistry and SIP exposure before finalizing the union.
Типичные приложения
Pharmaceutical water pipingClean-steam distributionCIP and SIP manifoldsBioprocess transfer linesHygienic food and cosmetic piping
Технические параметры
Fitting type, nominal size, wall, tangent dimensions, finish, connection ends and seal material are selected to match the adjoining hygienic tube system.
| Основной материал | 316L stainless steel sanitary elbows, tees, reducers, ferrules and caps |
|---|---|
| Толщина панели | Fitting wall typically 0.89–2.77 mm |
| эффективная ширина | Matching tube outside diameter typically 6.35–152.4 mm |
| Максимальная длина | Individual fitting length typically up to 600 mm |
| Толщина линий стали | Clamp band typically 1.5–3.0 mm |
| Плотность ядра | Плотность нержавеющей стали 316L приблизительно 8000 kg/m³ |
| Теплопроводимость | Нержавеющая сталь 316L примерно 15 Вт/(м · К) при температуре окружающей среды |
| Поверхностная отделка | Mechanically polished or electropolished wetted surface with clean satin exterior |
| Объединенный тип | Orbital-weld ends, hygienic clamp ferrules or configured mixed weld-and-clamp ends |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Elbows from 45 to 180 degreesEqual or reducing teesConcentric or eccentric reducersWeld-end or clamp-end configurationsMechanical-polish or electropolish gradeEPDM, FKM or PTFE-based sealsASME BPE, ISO, DIN or metric dimensions
Planning a Sanitary Pipe Fittings specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
