Three-quarter view of the high-airflow fan filter unit showing twin blowers above a broad perforated outlet face

FFU 및 터미널 공기 정화 장비

고공류 팬 필터 장치

A large-format FFU with two EC blowers and a broad final-filter face, bringing a twin-fan clean-air supply assembly into one reinforced ceiling housing.

Twin EC Blower Arrangement
Large-Format Ceiling Housing
Broad Final-Filter Face
Common Control Enclosure

견적 요청 제품 찾아보기

상품 소개

The high-airflow fan filter unit combines two EC blowers with a broad final-filter face in a reinforced ceiling housing. A central enclosure serves the twin-fan assembly, and the wide filter frame provides the outlet area for clean-air distribution. The large-format arrangement is intended for clean-air zones in which total delivered volume and the spatial distribution of that air must be considered together.

주요 기능

Two EC blowers are incorporated into a single large-format ceiling module.

The final-filter face extends beneath both blower positions.

A central enclosure brings the two blower connections together above the outlet assembly.

A reinforced perimeter supports the wide filter and diffuser assembly.

응용 프로그램 솔루션

A high total airflow figure is only useful when the outlet pattern, control zoning and service requirements suit the work area.

One large module and several smaller modules create different control and maintenance layouts.Compare independent zones, electrical connections, ceiling coverage and replacement access before choosing the footprint.

A total volume figure does not show whether air reaches the far edges of a wide outlet.Define a multi-point velocity check across the effective filter face, including the areas beneath each blower.

A wide filter assembly needs space for removal as well as installation.Allow a clear service route and a safe lifting method for the complete filter and diffuser assembly.

Equal motor speeds do not by themselves establish equal airflow from the two fan zones.Evaluate the installed outlet pattern and use the specified control adjustment method when balancing the module.

일반적인 응용 프로그램

High-coverage semiconductor clean zonesLarge laminar-flow work areasBattery and precision-component productionCleanrooms with limited ceiling-module positionsHigh-air-change process rooms

기술 매개변수

Common reference configuration choices for a large-format, twin-blower FFU.

Blower Arrangement	Two EC blowers within a shared ceiling housing
Large-Format Module	Common nominal format: 4 x 4 ft
Metric Housing Footprint	Typical metric-family option: 1175 x 1175 mm
Reference Face Velocity	Typical selection target: 0.45 m/s over the final-filter face
주택 건설	Reinforced metal casing with a broad final-filter support frame
Final-Filter Choices	Large-face HEPA or ULPA panel configuration
Supply-Voltage Option	Common option: 230 V AC
Control Assembly	Common electrical enclosure serving the twin-blower arrangement
Speed-Reference Options	Local adjustment or 0-10 V analogue reference; remote grouping with a compatible controller
Filter-Seal Construction	Perimeter gasket compressed against the final-filter frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Alternative large-format housing layoutsHEPA or ULPA final-filter selectionLocal speed adjustmentCompatible remote or group-control configuration

Air-Volume Selection and Installation

Size by delivered volume and usable outlet area

State the required total airflow in m³/h, the external resistance and the final-filter configuration. Use the effective open filter face when relating volume to average velocity; nominal housing area is not the same as usable outlet area. Room air-change calculations also require the room volume and the complete supply-and-return layout.

Choose the footprint and service arrangement

Provide the ceiling opening, supporting grid, available headroom and the route for lifting and replacing the filter assembly. Select the filter grade and sealing arrangement with the unit. Local adjustment and remote control are separate configuration choices; the supplied control system determines how the two blowers are adjusted and monitored.

Balance both fan zones

During commissioning, check total delivery and the velocity pattern at several positions beneath the filter rather than only at the centre. Match the circuit to the supplied electrical rating, secure the wide housing on its specified supports and isolate power before servicing either blower.

For resistance-led selections, compare the high-static-pressure fan filter unit. For smaller independently controlled ceiling zones, review the EC fan filter unit.

Planning a High-Airflow Fan Filter Unit specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.