STjh mid-size 53 by 48 by 66 inch floor transfer chamber with aluminum roll-up doors and wide cart opening

STJH-LARGE-MATERIAL-TRANSFER-CHAMBER-53X48X66

Roll-Up Material Transfer Chamber 53 × 48 × 66 in

A mid-size walk-through roll-up chamber for production carts and equipment that need a controlled boundary without swing-door clearance.

52 x 69 in clear opening
4 in/s powered roll-up doors
Medium production-cart capacity

見積もりリクエスト製品案内

商品紹介

This chamber provides approximately 52.75 x 48 x 66.25 in of internal space and a current 52 x 69 in clear door opening. Interlocked aluminum-slat doors travel at 4 in/s, with obstruction sensing and a 120 V single-phase drive. Compared with the compact model, it accepts full production carts; compared with the 68 in wide chamber, it limits the building opening for medium equipment.

主要な特徴

Walk-through cart envelope

The 52 in opening width and 69 in height accommodate medium carts and mobile process equipment.

Obstruction-aware door motion

A pressure-sensitive safety circuit stops door travel when the closing edge encounters an object.

Controlled powered sequencing

The bidirectional drive, brake and electronic interlock coordinate the opposed roll-up doors.

技術的なパラメータ

Internal Clearance	Approximately 52.75 W x 48 D x 66.25 H in
External Dimensions	63.5 W x 50 x 87 H in in the manufacturer selection table
Door Opening	52 W x 69 H in
Door Material	Aluminum slats
Door Speed	4 in/s
Interlock	Automatic electronic
Safety Device	Pressure-sensitive obstruction circuit
Electrical	120 V, 6 A, single phase, 50/60 Hz
Air Shower	Not included
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

For mobile process tools, covered component carts and equipment moving through pharmaceutical, electronics and precision-manufacturing cleanroom boundaries. Measure the tallest accessory and widest caster position, not just the cart deck, and plan powered-door service access above the openings.

Solutions for Your Application

A swing-door cargo airlock cannot open safely in a busy equipment corridor.The powered slat doors rise vertically, preserving the approach aisle for carts and operators.

A powered door may close onto a handle or partially positioned cart.Use the pressure-sensitive edge and operating procedure together, keeping the 52 x 69 in opening visibly clear before each cycle.

利用可能なオプション

Specify access controls, window panels, door-status interface, emergency stop and mounting treatment. Confirm the permitted door-cycle frequency and add filtered air treatment only if the transfer risk requires more than the frozen base chamber.

Planning a Roll-Up Material Transfer Chamber 53 × 48 × 66 in specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する