STjh mid-size 53 by 48 by 66 inch floor transfer chamber with aluminum roll-up doors and wide cart opening

STJH-LARGE-MATERIAL-TRANSFER-CHAMBER-53X48X66

Roll-Up Material Transfer Chamber 53 × 48 × 66 in

A mid-size walk-through roll-up chamber for production carts and equipment that need a controlled boundary without swing-door clearance.

52 x 69 in clear opening
4 in/s powered roll-up doors
Medium production-cart capacity

Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

This chamber provides approximately 52.75 x 48 x 66.25 in of internal space and a current 52 x 69 in clear door opening. Interlocked aluminum-slat doors travel at 4 in/s, with obstruction sensing and a 120 V single-phase drive. Compared with the compact model, it accepts full production carts; compared with the 68 in wide chamber, it limits the building opening for medium equipment.

Các tính năng chính

Walk-through cart envelope

The 52 in opening width and 69 in height accommodate medium carts and mobile process equipment.

Obstruction-aware door motion

A pressure-sensitive safety circuit stops door travel when the closing edge encounters an object.

Controlled powered sequencing

The bidirectional drive, brake and electronic interlock coordinate the opposed roll-up doors.

Thông số kỹ thuật

Internal Clearance	Approximately 52.75 W x 48 D x 66.25 H in
External Dimensions	63.5 W x 50 x 87 H in in the manufacturer selection table
Door Opening	52 W x 69 H in
Door Material	Aluminum slats
Door Speed	4 in/s
Interlock	Automatic electronic
Safety Device	Pressure-sensitive obstruction circuit
Electrical	120 V, 6 A, single phase, 50/60 Hz
Air Shower	Not included
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

For mobile process tools, covered component carts and equipment moving through pharmaceutical, electronics and precision-manufacturing cleanroom boundaries. Measure the tallest accessory and widest caster position, not just the cart deck, and plan powered-door service access above the openings.

Solutions for Your Application

A swing-door cargo airlock cannot open safely in a busy equipment corridor.The powered slat doors rise vertically, preserving the approach aisle for carts and operators.

A powered door may close onto a handle or partially positioned cart.Use the pressure-sensitive edge and operating procedure together, keeping the 52 x 69 in opening visibly clear before each cycle.

Các tùy chọn có sẵn

Specify access controls, window panels, door-status interface, emergency stop and mounting treatment. Confirm the permitted door-cycle frequency and add filtered air treatment only if the transfer risk requires more than the frozen base chamber.

Planning a Roll-Up Material Transfer Chamber 53 × 48 × 66 in specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi