STJH-HVAC-DAMPER-ACTUATOR-10NM-MODULATING

HVAC Damper Actuator 10 Nm 24 V Modulating

Proportional damper positioning without a spring-return mechanism.

Analog input supports intermediate blade positions.
A manual release permits local shaft adjustment.

商品紹介

The compact rotary drive clamps to a damper shaft and follows an analog position command. This 10 Nm selection is configured for a 150-second stroke, allowing gradual positioning where a power-loss return action is not required.

主要な特徴

Analog input supports intermediate blade positions.
A manual release permits local shaft adjustment.

技術的なパラメータ

Torque	10 Nm
Supply	24 V AC/DC
Control Signal	2–10 V DC
Fail-Safe Function	Non fail-safe
Rotation Angle	95 degrees
Configured Running Time	150 s per 90 degrees
Running Power	2.5 W
Holding Power	0.4 W
Ambient Temperature	-30 to 50 °C
カスタマイズ	Available for the damper shaft, control sequence and operating environment.

Applications

Modulating supply dampers
General HVAC branch positioning

Solutions for Your Application

An on-off motor cannot hold intermediate damper positions.

The analog command determines a proportional shaft position.

Fast blade travel is unnecessary for the control sequence.

The configured 150-second stroke provides a slower positioning option.

利用可能なオプション

Electrical lead configuration
Shaft clamp accessories
External mounting brackets

Planning a HVAC Damper Actuator 10 Nm 24 V Modulating specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する