STjh 800 mm HPL floor-spring door with a narrow leaf and visible floor-closer cover on a white background.

STJH-CLEANROOM-FLOOR-SPRING-DOOR-HPL-800

Cleanroom Floor-Spring Door 800 mm HPL

A compact HPL pivot door with concealed floor-spring control for an 800 mm opening.

Floor-level closing hardware clears the upper frame area.
The narrow HPL leaf suits compact circulation openings.
Perimeter rubber gaskets cushion the closing interface.

商品紹介

The closer is positioned at floor level rather than above the leaf, leaving the upper frame free from an exposed closer arm. An HPL face covers the single door panel and perimeter rubber gasketing follows the leaf edges. The 800 x 2100 mm door-hole size gives this version a narrow staff-passage format. Its pivot support and floor-spring arrangement must be integrated with the finished floor, while the surrounding cleanroom wall frame provides a smooth transition around the opening.

主要な特徴

Floor-level closing hardware clears the upper frame area.
The narrow HPL leaf suits compact circulation openings.
Perimeter rubber gaskets cushion the closing interface.

技術的なパラメータ

Door-Hole Width	800 mm
Door-Hole Height	2100 mm
Leaf Arrangement	Single
Facing	HPL
Closing Mechanism	Floor spring
Support Type	Pivoted leaf
Perimeter Seal	Rubber gasket
Handle	Stainless steel
Panel-Wall Options	50 、 75 または 100 の mm
カスタマイズ	Available for the floor construction and intended passage use.

Applications

Compact hygienic staff passages
Interior entrances needing a clear upper-frame appearance

Solutions for Your Application

An overhead closer arm interferes with the desired entrance detail.

The closing mechanism sits in the floor-spring position beneath the pivoted leaf.

The closer location could be overlooked during floor work.

Coordinate the floor-spring pocket and access cover with the finished floor before installation.

利用可能なオプション

Compatible stainless pull-handle selection
Wall-frame adaptation
Standard HPL surface finish

Planning a Cleanroom Floor-Spring Door 800 mm HPL specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する