STjh six-row five-eighth-inch chilled-water cooling coil with a deeper six-row tube bank on white.

STJH-CHILLED-WATER-COOLING-COIL-6ROW-58IN

Chilled-Water Cooling Coil Six-Row 5/8-Inch

A medium-depth wet coil providing greater total and latent capacity than a four-row core for central cleanroom AHUs.

Six-row dehumidification core
6-14 fins per inch
Galvanized or stainless casing

商品紹介

This six-row configuration adds two full tube rows beyond the shallow model, increasing surface contact and latent-cooling potential. Five-eighth-inch tubes, 6-14 fins per inch and galvanized or stainless casing options allow it to be rated for general cleanroom cooling and dehumidification. The coil is a balanced central-AHU choice when four rows are insufficient but an eight-row low-temperature core would consume unnecessary fan static.

主要な特徴

Greater latent capacity

Two additional rows extend air contact with the cold surface for more moisture removal.

Configurable fin density

Fin spacing can be balanced against heat transfer, fouling risk and pressure drop.

Wet-service casing choice

Stainless construction can be selected for humid or frequently cleaned AHU sections.

技術的なパラメータ

Tube Rows	6
Tube Outside Diameter	5/8 in
Tube Material	Copper
Fin Density	6-14 fins per inch
Fin Material	Aluminum by standard selection
Casing	Galvanized or stainless steel
Fluid	Chilled water
Condensate Management	Full drain pan required
Primary Duty	General cooling and dehumidification
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

For central cleanroom AHUs serving pharmaceutical, electronics and controlled production areas with combined sensible and latent loads.

Solutions for Your Application

The deeper wet coil accumulates biological soil between close fins.Select cleanable fin spacing, provide upstream filtration and preserve access for inspection and washing.

Water circuiting produces poor low-load control and unstable leaving temperature.Match circuits and control valve authority to the design flow and turndown requirement.

利用可能なオプション

Confirm face dimensions, cooling and latent load, water flow, fin spacing, tube wall, circuits, coating, casing and drain-pan material.

Planning a Chilled-Water Cooling Coil Six-Row 5/8-Inch specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する